E46 low power, stalling
Discussion
I recently acquired a 330ci a few months ago, and ever since I have got it, it has felt low on power, and recently has started stalling frequently. Firstly I put it down to a vacuum leak but after looking I have not been able to find one. I then downloaded INPA on my laptop to check codes, these codes came back:
106 VANOS control mechanism. Exhaust sluggish or blocked
65 Camshaft sensor (intake) error
83 Crankshaft sensor error
228 Lambda control deviation Bank 2
227 Lambda control deviation Bank 1
244 Segment time measurement faulty (crankshaft signal)
I already tried replacing the crank sensor with a new one, as it came up on my normal obd scanner before I did this, but when I installed the new one it would crank but not even start. So I reinstalled the old one and it worked fine again, in regards to starting the car. Im not sure where to go from here, whether to get a refurbished vanos or new cam sensors. All advice would be greatly apricated.
106 VANOS control mechanism. Exhaust sluggish or blocked
65 Camshaft sensor (intake) error
83 Crankshaft sensor error
228 Lambda control deviation Bank 2
227 Lambda control deviation Bank 1
244 Segment time measurement faulty (crankshaft signal)
I already tried replacing the crank sensor with a new one, as it came up on my normal obd scanner before I did this, but when I installed the new one it would crank but not even start. So I reinstalled the old one and it worked fine again, in regards to starting the car. Im not sure where to go from here, whether to get a refurbished vanos or new cam sensors. All advice would be greatly apricated.
Gassing Station | BMW General | Top of Page | What's New | My Stuff