Chimney Cowl

[jmn]

The recent Storms were too much for mine and destroyed it, leaving only the brackets attached to the Chimney Pot.

Can anyone recommend a Cowl that should withstand Storms? The Cowl is on a Chimney Pot, on a Chimney with a stainless flue leading down to a multi fuel stove.

[Purosangue]

jmn said:

The recent Storms were too much for mine and destroyed it, leaving only the brackets attached to the Chimney Pot.

Can anyone recommend a Cowl that should withstand Storms? The Cowl is on a Chimney Pot, on a Chimney with a stainless flue leading down to a multi fuel stove.

normally for multi fuel stove ( wood burner ) I would recommend a screw on Mi Flue pot hanging cowl


https://simplystovesuk.com/product/mi-flues-mi-fle...

The beauty about this design they screw onto your existing stainless steel liner , and are secured with the normal adjusting strap

edit you will need to know your flue size normally 5" 125mm or 6" 200mm if your wood burner is HETAS registered look inside where your indoor meter is there should be a plate that will tell you your flue size

Edited by Purosangue on Tuesday 27th January 14:57

[jmn]

Many thanks.