Wiper park switch replacement
Discussion
Afternoon all. I'm looking for some guidance on how to change the wiper park switch. There's a link on the Cerbera "how to guides" page on here, but the link takes me to some holding page and nothing of use. Can anyone point me in the direction of a useful how-to, or provide some guidance?
Thanks
Thanks
Adrian Venn over on the Chimera forum is the TVR windscreen motor expert (he repairs them too) and if you look for some of his posts in that forum there should be lots of info to help
https://www.pistonheads.com/gassing/topic.asp?h=0&...
Full instructions for fitting and sourcing here too
https://www.chimaerapages.com/technical-info.html
https://www.pistonheads.com/gassing/topic.asp?h=0&...
Full instructions for fitting and sourcing here too
https://www.chimaerapages.com/technical-info.html
When I refitted my wiper motor (very nicely refurbished by Adrian) I removed the expansion tank and drained the coolant out using a hand pump, but I'm not sure if you need to do the same for the wiper park switch
It's a bit tight in that corner but if you take your time it's a fairly easy job
HTH
It's a bit tight in that corner but if you take your time it's a fairly easy job
HTH
Gassing Station | Cerbera | Top of Page | What's New | My Stuff



