Tyre Pressure Warnings - Looks Wrong

[bad company]

I have a 2024 440 MSport so model G22 (I think).

I keep getting tyre pressure warnings and the car’s systems seem to be wrong. I’ve inflated all 4 tyres to the recommended pressure. I’ve checked the accuracy using 3 separate compressors but I’m still showing the readings as below. Is this something I can correct or do I need to book the car into BMW?

Any help appreciated.

[Tymb]

After you have set the pressures to the correct value you probably need to go into a tyre settings menu and do a calibration.

[bad company]

Tymb said:

After you have set the pressures to the correct value you probably need to go into a tyre settings menu and do a calibration.

Done that, it’s still showing incorrect pressures. Worked like that on older models.

[bigdom]

Compressors do vary. Really needs checking with a tyre pressure gauge. My compressor, tyre gauge and tpms never align.

[8Tech]

If you increase the pressures temporarily to 3 bar, does the display change? If not, you have a communication error. You may also need to drive the car at least 5 miles for the sensors to reset.

[bad company]

8Tech said:

If you increase the pressures temporarily to 3 bar, does the display change? If not, you have a communication error. You may also need to drive the car at least 5 miles for the sensors to reset.

Thanks, I’ll try that.

[Nic-nfr74]

drive it after the re calibration

It needs to ' see ' rotation for a few miles

[Doesitdrive]

Nic-nfr74 said:

drive it after the re calibration

It needs to ' see ' rotation for a few miles

This, reset after driving.

[danb79]

bad company said:

I have a 2024 440 MSport so model G22 (I think).

I keep getting tyre pressure warnings and the car s systems seem to be wrong. I ve inflated all 4 tyres to the recommended pressure. I ve checked the accuracy using 3 separate compressors but I m still showing the readings as below. Is this something I can correct or do I need to book the car into BMW?

Any help appreciated.

As others have said; into iDrive, reset tyre pressures and then drive the car, it'll go from 0 to 100% whilst you're driving and that should be it done

FWIW I use this when I check tyre pressures on both my E39 and our F31: https://www.amazon.co.uk/Draper-69924-Pressure-Gau...

It's hell of a lot more accurate compared to my Ryobi cordless tyre inflator; and my RING tyre inflator

When I look at the tyre pressures on the F31s iDrive they're all different; even though the Draper tyre pressure gauge says that the fronts are the same, and the rears are the same etc