Extending bath filler overflow waste pipe

[fourstardan]

I have a scudo bath filler that came with a rediculous sized overflow and a bath withbthe plug in the middle. I thought i had a solution with a cannabalised plug/pipe that came with a crosswater bath filler i bought going cheap on ebay.

Get the plug in...its too blddy low to the floor to get a trap in.

I had my eye on the mcalpine hc2650 as this will be a shower bath and boxed in with tile panel, this is 10cm clearance...great it fits as it has the trap in it as well as plug...But im now back to square one and the flexi is abojt 30cm too short!

Has anyone got any ideas to get this working with the hc2650 and a longer pipe?

The bath filler needs to be 25mm wide
Hc2650 is 29mm wide, hole 25mm

[Belle427]

Do you just need a longer pipe from the overflow?

[fourstardan]

Belle427 said:

Do you just need a longer pipe from the overflow?

Yes and one that fits as i ordered one that was 25mm and didnt.

[Belle427]

You could use any pipe really if it fits and both ends were the same, maybe a length of rubber hose used on cars, would just need to know the ID.

[fourstardan]

Struggling to find a pipe though with the different connection sizes.

I have just ordered a 32mm connector to go Plug > 32mm pipe > connector > anothrr bit of 32mm then connect theexisting pipe provided.

Failing ghati might get away with this so ordered one too.

https://www.toolstation.com/extendable-connector-m...