DBS / DB11 rear seat removal for fusebox access
Discussion
Does anyone know how you actually remove the rear seat to access the rear fusebox?
My parking sensors have stopped working and throwing the error tone. Want to check it isn't just a fuse. The relevant fuse seems to be under the rear driver's side seat but I can't see how you take out the base. Anyone done this?
My parking sensors have stopped working and throwing the error tone. Want to check it isn't just a fuse. The relevant fuse seems to be under the rear driver's side seat but I can't see how you take out the base. Anyone done this?
Yes, I've had the back seat out several times in my DB11.
On the SEAT BOTTOM, there are two brackets. They can be found by prying out the carpet directly under the seat bottom. These brackets hold the seat in place with two torx screws. Can't remember the exact size, 25 might be it.
In this pic (dark, I know) the seat is lifted up after the bolts are removed. Then the seat just pulls out from the back.
The seat brackets are in yellow, the mounting positions behind the carpet in blue.
On the SEAT BOTTOM, there are two brackets. They can be found by prying out the carpet directly under the seat bottom. These brackets hold the seat in place with two torx screws. Can't remember the exact size, 25 might be it.
In this pic (dark, I know) the seat is lifted up after the bolts are removed. Then the seat just pulls out from the back.
The seat brackets are in yellow, the mounting positions behind the carpet in blue.
Gassing Station | Aston Martin | Top of Page | What's New | My Stuff