T350 - Door Alcantara Wet (at bottom)
Discussion
I kept noticing my Door Alcantara Wet at bottom - so decided to take a look.
A nice puddle of water collects in the fiberglass where the door panels fits into at the bottom.
I drilled 2 holes here to let the water drain into the door void (it has drain holes).. and on the other side the rubber panel had come un-glued and dropped into the bottom of the door void.
I just glued this back on and added 2 screws and drilled 2 holes where the water collects.
We've not had much rain down south in the last 2 weeks since I did this but the Alcantara has stayed dry so far.
So - if yours is wet it's an easy fix :D
A nice puddle of water collects in the fiberglass where the door panels fits into at the bottom.
I drilled 2 holes here to let the water drain into the door void (it has drain holes).. and on the other side the rubber panel had come un-glued and dropped into the bottom of the door void.
I just glued this back on and added 2 screws and drilled 2 holes where the water collects.
We've not had much rain down south in the last 2 weeks since I did this but the Alcantara has stayed dry so far.
So - if yours is wet it's an easy fix :D
Gassing Station | Tamora, T350 & Sagaris | Top of Page | What's New | My Stuff


