Electronic Tools
Discussion
I love his channel!
I mend my own stuff and stuff for mates - usually invilves replacing electrolytic caps - recently a welder (aluminium film caps) and 2 x subs (both Elec caps on the power side), oh and another film cap in one of the subs. Plus loads of other things - ear buds (new batteries) - flip phone - new bendy screen.
Been doing it since I was a kid really. I'm certainly no expert. I build electronic projects here and there.
Your basics:
Solder station (doesn't have to be spendy - I use an old Maplins one)
Solder pump
Solder wick
Rework station (hot air)
Proper leaded solder
Magnifier on an arm with light thingy (I also have a cheap electronic microscope).
Decent 12-20v PSU
Good multimeter with thin tips and clip tips (brandless Amazon ones are just great)
Handfull of small croc clip cables / test leads, and some beefier ones (for power)
Good radio and hot tea :-)
Its very satisfying being able to mend stuff and really doesn't require much knowledge to do the basics. Google and AI will often point to the common components that fail. So you don't need Marks knowledge from the start!
I've done a tiny bit of SMD rework but just be aware its way harder than the videos make it out to be - requires some deft touch with the heat, and you'll need flux too. There is a guy on YT that repais loads of Xboxes and PSs worth a watch - he is mr SMD!
Mended my £1000 B&W sub that was "whistling" all the time. One metal film transistor and that was it. 30p maybe. I found it by opening it up and literally listening, plus, the internet told me to look at those film caps 1st as they are prone to it.
Years ago mended a £4500 projector. One 12p cap. That was it.
A lot of the fun is narrowing down and matching components on Farnell-CPC / Mouser. Especially obsolete ones.
I mend my own stuff and stuff for mates - usually invilves replacing electrolytic caps - recently a welder (aluminium film caps) and 2 x subs (both Elec caps on the power side), oh and another film cap in one of the subs. Plus loads of other things - ear buds (new batteries) - flip phone - new bendy screen.
Been doing it since I was a kid really. I'm certainly no expert. I build electronic projects here and there.
Your basics:
Solder station (doesn't have to be spendy - I use an old Maplins one)
Solder pump
Solder wick
Rework station (hot air)
Proper leaded solder
Magnifier on an arm with light thingy (I also have a cheap electronic microscope).
Decent 12-20v PSU
Good multimeter with thin tips and clip tips (brandless Amazon ones are just great)
Handfull of small croc clip cables / test leads, and some beefier ones (for power)
Good radio and hot tea :-)
Its very satisfying being able to mend stuff and really doesn't require much knowledge to do the basics. Google and AI will often point to the common components that fail. So you don't need Marks knowledge from the start!
I've done a tiny bit of SMD rework but just be aware its way harder than the videos make it out to be - requires some deft touch with the heat, and you'll need flux too. There is a guy on YT that repais loads of Xboxes and PSs worth a watch - he is mr SMD!
Mended my £1000 B&W sub that was "whistling" all the time. One metal film transistor and that was it. 30p maybe. I found it by opening it up and literally listening, plus, the internet told me to look at those film caps 1st as they are prone to it.
Years ago mended a £4500 projector. One 12p cap. That was it.
A lot of the fun is narrowing down and matching components on Farnell-CPC / Mouser. Especially obsolete ones.
Edited by Griffith4ever on Thursday 11th June 07:08
I have x2 of these, I paid nowhere near £30 each - worth checking Aliexpress. They are Fluke copies
https://www.bimblesolar.com/multimeter?srsltid=Afm...
Random soldering station - there are LOADS out there, just aim for something with a digital temp display and easily available replacement tips of varying sizes. You'll be using a flat angled one mostly
https://www.amazon.co.uk/Lytool-Professional-Tempe...
That one even comes with a solder sucker
Rework hot air:
https://www.amazon.co.uk/YIHUA-858D-desoldering-Ad...
You can get combos but I'm not a fan of tying everything to one place / block for no good reason.
Solder - look for something like 60/40 (sn/pb)
https://uk.rs-online.com/web/p/solder/1796669
Size? get some <1mm and some maybe 1.2mm for bigger stuff.
Leaded solder melts at a lower temp and flows nicer. Its also VERY helpful to add to old existing PCB solder to mix with the existing lead free solder and make it easier to melt, and then pump away with the solder sucker
https://www.bimblesolar.com/multimeter?srsltid=Afm...
Random soldering station - there are LOADS out there, just aim for something with a digital temp display and easily available replacement tips of varying sizes. You'll be using a flat angled one mostly
https://www.amazon.co.uk/Lytool-Professional-Tempe...
That one even comes with a solder sucker
Rework hot air:
https://www.amazon.co.uk/YIHUA-858D-desoldering-Ad...
You can get combos but I'm not a fan of tying everything to one place / block for no good reason.
Solder - look for something like 60/40 (sn/pb)
https://uk.rs-online.com/web/p/solder/1796669
Size? get some <1mm and some maybe 1.2mm for bigger stuff.
Leaded solder melts at a lower temp and flows nicer. Its also VERY helpful to add to old existing PCB solder to mix with the existing lead free solder and make it easier to melt, and then pump away with the solder sucker
Griffith4ever said:
I have x2 of these, I paid nowhere near £30 each - worth checking Aliexpress. They are Fluke copies
https://www.bimblesolar.com/multimeter?srsltid=Afm...
Random soldering station - there are LOADS out there, just aim for something with a digital temp display and easily available replacement tips of varying sizes. You'll be using a flat angled one mostly
https://www.amazon.co.uk/Lytool-Professional-Tempe...
That one even comes with a solder sucker
Rework hot air:
https://www.amazon.co.uk/YIHUA-858D-desoldering-Ad...
You can get combos but I'm not a fan of tying everything to one place / block for no good reason.
Solder - look for something like 60/40 (sn/pb)
https://uk.rs-online.com/web/p/solder/1796669
Size? get some <1mm and some maybe 1.2mm for bigger stuff.
Leaded solder melts at a lower temp and flows nicer. Its also VERY helpful to add to old existing PCB solder to mix with the existing lead free solder and make it easier to melt, and then pump away with the solder sucker
Thanks I will have a look. Looking at some of the kit Mark has I have seen these on eBay;https://www.bimblesolar.com/multimeter?srsltid=Afm...
Random soldering station - there are LOADS out there, just aim for something with a digital temp display and easily available replacement tips of varying sizes. You'll be using a flat angled one mostly
https://www.amazon.co.uk/Lytool-Professional-Tempe...
That one even comes with a solder sucker
Rework hot air:
https://www.amazon.co.uk/YIHUA-858D-desoldering-Ad...
You can get combos but I'm not a fan of tying everything to one place / block for no good reason.
Solder - look for something like 60/40 (sn/pb)
https://uk.rs-online.com/web/p/solder/1796669
Size? get some <1mm and some maybe 1.2mm for bigger stuff.
Leaded solder melts at a lower temp and flows nicer. Its also VERY helpful to add to old existing PCB solder to mix with the existing lead free solder and make it easier to melt, and then pump away with the solder sucker
https://ebay.io/m/P8m64c
https://ebay.io/m/odURin
Griffith4ever said:
Your call but that's a s
t tonne of money for what is a very simple thing. And I like a digital temp display.
Its just a hot metal stick at the end of the day
Absolutely.t tonne of money for what is a very simple thing. And I like a digital temp display.Its just a hot metal stick at the end of the day
For hobby use, a "936" soldering station would probably be fine. They're assorted clones of a Hakko model, can can be had for about £30.
eg, https://www.ebay.co.uk/itm/127807620873 currently £35. You can get cheaper, more basic ones.
(you can get combined hot air/solder stations, but I've no knowledge of those)
Mend it Mark and the likes will get gifted a lot of very top end / expensive kit that they'd never normally buy. You have to really really want a specific soldering iron to pay £200, used!
To put it in perspective, I'm still using the same Antex iron (small 15w(ish) jobby) I've had since I was 15 for tiny stuff. My main iron is the £30 Maplin soldering station - you can get a great assortment of bits for small money. For big stuff I've got an 80Watter which gets dragged out rarely. That cost around £30 - A Weller - I've had issues with Wellers eating tips quickly too.
I find fixed temp irons vapourise the flux on leaded solder. They are set for lead free.
On my workbench for my small "factory" I have a 40w Weller but run through a voltage dropper to knock teh temp down a bit. Tips last forever this way.
To put it in perspective, I'm still using the same Antex iron (small 15w(ish) jobby) I've had since I was 15 for tiny stuff. My main iron is the £30 Maplin soldering station - you can get a great assortment of bits for small money. For big stuff I've got an 80Watter which gets dragged out rarely. That cost around £30 - A Weller - I've had issues with Wellers eating tips quickly too.
I find fixed temp irons vapourise the flux on leaded solder. They are set for lead free.
On my workbench for my small "factory" I have a 40w Weller but run through a voltage dropper to knock teh temp down a bit. Tips last forever this way.
Griffith4ever said:
Mend it Mark and the likes will get gifted a lot of very top end / expensive kit that they'd never normally buy. You have to really really want a specific soldering iron to pay £200, used!
To put it in perspective, I'm still using the same Antex iron (small 15w(ish) jobby) I've had since I was 15 for tiny stuff. My main iron is the £30 Maplin soldering station - you can get a great assortment of bits for small money. For big stuff I've got an 80Watter which gets dragged out rarely. That cost around £30 - A Weller - I've had issues with Wellers eating tips quickly too.
I find fixed temp irons vapourise the flux on leaded solder. They are set for lead free.
On my workbench for my small "factory" I have a 40w Weller but run through a voltage dropper to knock teh temp down a bit. Tips last forever this way.
I understand what you are saying. They probably do get gifted a lot of tools. I could always adopt Adam Savage approach. Of buy the cheapest tool. To put it in perspective, I'm still using the same Antex iron (small 15w(ish) jobby) I've had since I was 15 for tiny stuff. My main iron is the £30 Maplin soldering station - you can get a great assortment of bits for small money. For big stuff I've got an 80Watter which gets dragged out rarely. That cost around £30 - A Weller - I've had issues with Wellers eating tips quickly too.
I find fixed temp irons vapourise the flux on leaded solder. They are set for lead free.
On my workbench for my small "factory" I have a 40w Weller but run through a voltage dropper to knock teh temp down a bit. Tips last forever this way.
Something like this: https://ebay.io/m/xcEP43
Multimeter: https://amzn.eu/d/0e3AwcTR
Edited by Justadreamer on Thursday 11th June 17:34
Although I'm an electronics engineer, I grew up messing around with electronics and so I know what's possible with basic equipment. Don't get sucked into the expensive gear. That just ends up being a hobby where you collect more and more expensive equipment and never use it. Look around a professional workshop, and most of the gear is relatively basic stuff.
Any of the inexpensive temperature controlled soldering irons (not hot air) are probably fine. 90% of the time I use a 45W uncontrolled Antex, so...
Metcal are made for professional rework and production environments.
Yeah oldschool lead solder with flux core is preferable. Its just nicer all round. Don't lick your fingers and you'll be fine. DON'T get it from Chinese sites, Ebay or Amazon. DO get it from RS, Rapid Electronics, CPC/Farnell or similar professional site. Don't be surprised if it is hard to get, they can sometimes insist on only selling lead solder to business users.
I have a 5.5 digit bench multimeter, and a couple of Fluke meters (and some old AVOs). What do I use most of the time? This from Lidl. Decent build quality, very close to my Flukes in terms of measurement. Invest in a set of really nice probes with silicone leads though. Most cheap meters are surprisingly accurate. But I wouldn't go testing mains voltages with them.
Really don't worry about getting an oscilloscope at this point. They look sexy, but are rarely needed.
If you are over 30 and don't have really good close-up vision, something like these magnifying visors are great. Very cheap now on Amazon etc. Which reminds me a really good white light or 2 on your bench is really good to have.
A decent power supply can be had for under £50, even from a big retailer: https://cpc.farnell.com/duratool/d03234/power-supp...
Any of the inexpensive temperature controlled soldering irons (not hot air) are probably fine. 90% of the time I use a 45W uncontrolled Antex, so...
Metcal are made for professional rework and production environments.
Yeah oldschool lead solder with flux core is preferable. Its just nicer all round. Don't lick your fingers and you'll be fine. DON'T get it from Chinese sites, Ebay or Amazon. DO get it from RS, Rapid Electronics, CPC/Farnell or similar professional site. Don't be surprised if it is hard to get, they can sometimes insist on only selling lead solder to business users.
I have a 5.5 digit bench multimeter, and a couple of Fluke meters (and some old AVOs). What do I use most of the time? This from Lidl. Decent build quality, very close to my Flukes in terms of measurement. Invest in a set of really nice probes with silicone leads though. Most cheap meters are surprisingly accurate. But I wouldn't go testing mains voltages with them.
Really don't worry about getting an oscilloscope at this point. They look sexy, but are rarely needed.
If you are over 30 and don't have really good close-up vision, something like these magnifying visors are great. Very cheap now on Amazon etc. Which reminds me a really good white light or 2 on your bench is really good to have.
A decent power supply can be had for under £50, even from a big retailer: https://cpc.farnell.com/duratool/d03234/power-supp...
Gassing Station | Computers, Gadgets & Stuff | Top of Page | What's New | My Stuff