Pre serp Chimaera earth lead location
Discussion
Evening everyone
Can someone confirm if this earth lead picks up behind the swirl pot on a pre serp Chimaera.
Unfortunately I have inherited from late father and this is what I can see ?
There is a copper washer on the top swirl pot bolt which looks correct but need to make sure.
All the best
Chris
Can someone confirm if this earth lead picks up behind the swirl pot on a pre serp Chimaera.
Unfortunately I have inherited from late father and this is what I can see ?
There is a copper washer on the top swirl pot bolt which looks correct but need to make sure.
All the best
Chris
Do not attach the earth/ground strap to the long bolts in shot 
every time that strap is disturbed the bolt will require sealing with Shellac etc (bolt hole goes into water jacket) use alternative timing cover bolts but def not those WP bolts , add a gearbox to chassis earth strap too you can never have enough engine to chassis or to batt - Neg straps within reason obviously 2-3 would be nice however
every time that strap is disturbed the bolt will require sealing with Shellac etc (bolt hole goes into water jacket) use alternative timing cover bolts but def not those WP bolts , add a gearbox to chassis earth strap too you can never have enough engine to chassis or to batt - Neg straps within reason obviously 2-3 would be nice however Gassing Station | Chimaera | Top of Page | What's New | My Stuff