Which wire crimper for a flag connector?

[geeman237]

I’d like to find a crimp tool for a flag spade connector per the photo below. It’s uninsulated and a 3/8” wide connector.
Any recommendations?

[finlo]

I'd solder it on it it's just a one off (assuming you have a soldering iron).

[E-bmw]

Similarly, I would crimp with long nosed pliers & then solder to be sure, easier than buying a crimping tool that may never be used again.

[steveo3002]

you can get them pre crimped on a length of wire on ebay etc if that might work