Cracked heat shield on 996TT
Discussion
Anyone experienced cracked heat shields on a 993 or 996 Turbo ?
Just gave my car a major service @ 54K miles = £650+ VAT + £100 of sundries. However I’ll hold off fixing the heat shields for the Turbos. Both are cracked and rattle a bit which is irritating but not critical as they’re still doing their job fine.
Just gave my car a major service @ 54K miles = £650+ VAT + £100 of sundries. However I’ll hold off fixing the heat shields for the Turbos. Both are cracked and rattle a bit which is irritating but not critical as they’re still doing their job fine.
cyrus - major service cost seems low - was that at an independant ? I just paid over £1k for a major service - which actually included sorting out my cracked heat shield.
As far as I know its a fairly common thing on 996 TT's, the bolts holding the shield often corrode making it difficult to get them off.
If you can live with the rattle then no reason to get it changed immediately.
As far as I know its a fairly common thing on 996 TT's, the bolts holding the shield often corrode making it difficult to get them off.
If you can live with the rattle then no reason to get it changed immediately.
Gassing Station | Porsche General | Top of Page | What's New | My Stuff


