Newbie question: Track pads life
Discussion
Fairly new to trackdays, done two so far at Donington and Oulton park. Before the first day I did a bit of brake prep and replaced my discs (they were lipped anyway) pads (mintex 1802's) and fluid (srf).
I've seemingly munched through the pads already, there's about 5mm left. The car is a Lotus Elise S3, which I assumed would be quite conservative on its consumables.
The brakes have performed brilliantly (I'm my inexperienced opinion) no fade and plenty of bite once warm. But is this level of wear normal or are the mintex a particularly short life pad? Want to get some options before I bung another set of mintex on there.
I can see where they've gone, my silver wheels come back powder coated black at the end of each day
I've seemingly munched through the pads already, there's about 5mm left. The car is a Lotus Elise S3, which I assumed would be quite conservative on its consumables.
The brakes have performed brilliantly (I'm my inexperienced opinion) no fade and plenty of bite once warm. But is this level of wear normal or are the mintex a particularly short life pad? Want to get some options before I bung another set of mintex on there.
I can see where they've gone, my silver wheels come back powder coated black at the end of each day
Top lurking Henry!
5mm left makes me think roughly 50% worn which sounds like moderate to slightly high wear for two days depending on how many laps you were getting in.
It’s not a crazy wear rate but you may want to try a different compound or brand when you do change them, Mintex F4R compound work/last well so may be worth a go.
5mm left makes me think roughly 50% worn which sounds like moderate to slightly high wear for two days depending on how many laps you were getting in.
It’s not a crazy wear rate but you may want to try a different compound or brand when you do change them, Mintex F4R compound work/last well so may be worth a go.
Gassing Station | Track Days | Top of Page | What's New | My Stuff