Lambda sensors - genuine or aftermarket?
Discussion
I need at least a pair of O2 sensors (upstream) and possibly downstream too for my 4.3 V8 Vantage
I believe there are aftermarket sensors available, but there's not much point if they are poor quality. Both AM specialists I've spoken to today don't recommend aftermarket.
However, £800 on AM genuine makes me baulk - has anyone fitted decent aftermarket and found them to be OK. if so, where from?
I believe there are aftermarket sensors available, but there's not much point if they are poor quality. Both AM specialists I've spoken to today don't recommend aftermarket.
However, £800 on AM genuine makes me baulk - has anyone fitted decent aftermarket and found them to be OK. if so, where from?
https://www.youtube.com/watch?v=QffBmobPa-8
All you need to know from Aston1936
Alternative O2 Sensors for an Aston Martin DB9
All you need to know from Aston1936
Alternative O2 Sensors for an Aston Martin DB9
XMark said:
Interestingly NGK recommend two different part numbers for front and rear, only difference being cable length, it may help when looking for some
Exactly the info I was looking for - thanksNGK = about £180 for all four sensors (might as well do them all, while I'm there). Genuine Aston Marton = £808
Not sure if the sensors are the same on the 4.3 and 4.7 bit a quick Google should be able to tell you and the posts above appear to confirm they are.
I got these from Opie Oil:
That said, they only had one NTK 95598 / OZA816-EE1 and the other one is on back order, so I ve currently got a here of the four sensors ready to fit.
I got these from Opie Oil:
- 2 × NTK 95598 / OZA816-EE1 (front control sensors)
- 2 × NTK 92107 / OZA836-EE13 (rear monitoring sensors)
That said, they only had one NTK 95598 / OZA816-EE1 and the other one is on back order, so I ve currently got a here of the four sensors ready to fit.
V8VS said:
Not sure if the sensors are the same on the 4.3 and 4.7 bit a quick Google should be able to tell you and the posts above appear to confirm they are.
I got these from Opie Oil:
That said, they only had one NTK 95598 / OZA816-EE1 and the other one is on back order, so I ve currently got a here of the four sensors ready to fit.
Yup - that’s what I’ve found. Upstream aren’t available from anywhere reliable and downstream are in stock everywhere I got these from Opie Oil:
- 2 × NTK 95598 / OZA816-EE1 (front control sensors)
- 2 × NTK 92107 / OZA836-EE13 (rear monitoring sensors)
That said, they only had one NTK 95598 / OZA816-EE1 and the other one is on back order, so I ve currently got a here of the four sensors ready to fit.
Reminds me of a problem I had a couple of years back.
I bought some NGK Lambda sensors, but struggled to fit them due to their location and the fact I couldn’t get the old ones undone.
Took them to my local garage who said they would only fit parts that they have supplied for legal reasons (?).
So I said, well you order them then and I’ll keep the ones I bought. Booked it back in again a week later, only to be told that they couldn’t get them!
As it turned out it was a MAF sensor that needed replacing. Still got the Lambda sensors in their boxes!,
I bought some NGK Lambda sensors, but struggled to fit them due to their location and the fact I couldn’t get the old ones undone.
Took them to my local garage who said they would only fit parts that they have supplied for legal reasons (?).
So I said, well you order them then and I’ll keep the ones I bought. Booked it back in again a week later, only to be told that they couldn’t get them!
As it turned out it was a MAF sensor that needed replacing. Still got the Lambda sensors in their boxes!,
Gassing Station | Aston Martin | Top of Page | What's New | My Stuff



