Torque wrench set
Author
Discussion

mart 63

Original Poster:

2,614 posts

275 months

Friday 21st August
quotequote all
I have a carbon bike on order, any recommendations for a set.
Thanks

Robertb

3,948 posts

269 months

Friday 21st August
quotequote all
I got the LifeLine Essentials set some years ago, from Wiggle. Its now available from Evans.

Seems decent quality and I've not heard any expensive CF parts splinter yet...

oddball1313

1,532 posts

154 months

Friday 21st August
quotequote all
I've had the Giant one for years now, here's the latest version

https://www.giant-bicycles.com/gb/adjustable-torqu...

There's loads of chinese ones on Amazon, how much i'd trust the torque settings to be accurate though......

https://www.amazon.co.uk/Uharbour-1-25-Dual-Direct...


Edited by oddball1313 on Friday 21st August 14:32

WH16

8,532 posts

249 months

Friday 21st August
quotequote all
https://www.amazon.co.uk/Wera-7515-Kraftform-Safe-...

This one is particularly suited to carbon bikes, rifle scope rings, etc. Nice low torque settings.

I also have one of these which I carry on the bike...

https://www.amazon.co.uk/Topeak-Torqbar-Torque-Wre...



David_M

489 posts

81 months

Friday 21st August
quotequote all
I have taken a simpler approach: I have one of those small 5nm torque wrenches, which covers nearly anything either into or around carbon, plus headsets and brake pads (and generally things with 4mm Allen key heads), and the rest I am happy to do by feel to higher torque.

frisbee

5,633 posts

141 months

Friday 21st August
quotequote all
WH16 said:
https://www.amazon.co.uk/Wera-7515-Kraftform-Safe-...

This one is particularly suited to carbon bikes, rifle scope rings, etc. Nice low torque settings.

I also have one of these which I carry on the bike...

https://www.amazon.co.uk/Topeak-Torqbar-Torque-Wre...
I've got one of those Wera torque screw drivers. It's good at low torque as there is no way you can exceed the torque it is set to but is awkward at higher torques as you don't have much leverage.

I still need to use a conventional torque wrench for a number of bolts, such as the saddle clamp.

Steve_H80

634 posts

53 months

Friday 21st August
quotequote all
I use a cheap Lidl cycle torque. It's much better than guessing on steel and aluminium, but for working on carbon fibre I would be looking to buy something more professional.

Magic919

14,589 posts

232 months

Friday 21st August
quotequote all

benny.c

3,802 posts

238 months

Saturday 22nd August
quotequote all
I have this Topeak one. It’s one of the best tools I have for my bikes. Also have the Park Tool preset 5Nm one which covers quite a few fixings.

https://www.topeak.com/global/en/product/1427-TORQ...

mart 63

Original Poster:

2,614 posts

275 months

Monday 24th August
quotequote all
Thanks for the replies and links. The shipping costs to Spain were expensive with some of the recommendations on here.
Ordered this one, apparently it comes certified.
https://www.bike24.es/productos/26436?sku=97843&am...

Smitters

4,417 posts

188 months

Friday 4th September
quotequote all
Another useful approach I've found is that unless you know for sure it should be tighter, the size in mm is often enough torque in Nm.

SoliD

1,547 posts

248 months

Monday 7th September
quotequote all
Have had the lifeline one for many years, but not treated it like a torque wrench should (unwinding it every time) so picked up the halfords advanced one the other day (£40 version) then found a draper 3/8" in my drawers that i'd completely forgotten about.