TVR Griffith alarm removal
Discussion
Hi Looking for some advice on removing the alarm on a pre serp Griffith (93)
Got a Griffith at the start of the year and it ran fine for 3 weeks and been trying to fix it since then
Fuel pump not priming , so hot wired it , engine cranking but spark plugs dry
Thinking that maybe the alarm has cut the power to the ECU and that’s why it not running
Part of the issue is that someone has been busy with the wire cutters behind the dash
So best just to remover the compleat alarm/imobliser system
Any advice much appreciated
Duncan
Got a Griffith at the start of the year and it ran fine for 3 weeks and been trying to fix it since then
Fuel pump not priming , so hot wired it , engine cranking but spark plugs dry
Thinking that maybe the alarm has cut the power to the ECU and that’s why it not running
Part of the issue is that someone has been busy with the wire cutters behind the dash
So best just to remover the compleat alarm/imobliser system
Any advice much appreciated
Duncan
Gassing Station | Griffith | Top of Page | What's New | My Stuff


