Rusty CCM brake disk bolt solution
Rusty CCM brake disk bolt solution
Author
Discussion

belfry

Original Poster:

1,076 posts

213 months

Wednesday 16th September
quotequote all
Back in 2023, @Fonzy and @skwdenyer we’re being incredibly helpful to Ferrari owning community by hunting for a solution to Rusty brake disc bolts, which can expand and crack the very expensive carbon brake discs.

I would like to do some preventative maintenance this year by replacing the bolts on my brake discs with 30,000 miles on them.

The original post around page 13 or 14 mentioned some success in finding the correct replacement bolts, but I cannot see any reference to any suppliers for the correct replacement bolts and fasteners.

Did we ever find a solution to this problem?

PRO5T

7,758 posts

56 months

Wednesday 16th September
quotequote all
Rebrake offer a service to simply rebuild with new hardware, I understand wanting to do it yourself but when torque specs are so critical (and order and balance I’ve heard) perhaps using a paid for service provides more peace of mind?


belfry

Original Poster:

1,076 posts

213 months

Wednesday 16th September
quotequote all
Thanks for that suggestion.

But you’re right, I’d want to do the work myself. It’s the sort of job that I’d be happy to take plenty of time over. Also, it’s an excuse to finally buy an electronic torque wrench.

Working on my cars is part of the fun of ownership for me.

Surely someone must have sourced some replacement fixings?

F355GTS

3,875 posts

286 months

Wednesday 16th September
quotequote all
I found a supplier in the States for the bolts but they were expensive at around $35 ea IIRC. It's also quite likely the the bolts won't simply come out, they are in sleeves which rust to the bolts and these sleeves expand cracking the discs

A number of 458 people are replacing their discs/ pads with those for a company called Stopflex which are significantly cheaper than Ferrari originals and overcome the weak brakes on 458s

PRO5T

7,758 posts

56 months

Wednesday 16th September
quotequote all
belfry said:
Thanks for that suggestion.

But you re right, I d want to do the work myself. It s the sort of job that I d be happy to take plenty of time over. Also, it s an excuse to finally buy an electronic torque wrench.

Working on my cars is part of the fun of ownership for me.

Surely someone must have sourced some replacement fixings?
Very much understood, I did indeed by a (none electronic) very nice torque wrench to keep a check on mine! In that case, why not email Wolfgang at Rebrake and see if he'll sell you the hardware to do it yourself-he replies very quickly and it's worth an email if it gets you a supply.

belfry

Original Poster:

1,076 posts

213 months

Thursday 17th September
quotequote all
F355GTS said:
I found a supplier in the States for the bolts but they were expensive at around $35 ea IIRC. It's also quite likely the the bolts won't simply come out, they are in sleeves which rust to the bolts and these sleeves expand cracking the discs
Nice to hear from you. Thanks for this information about the bolts. I did not know about the sleeves. I naively thought that it'd be a nice preventative piece of work to keep me occupied once Winter arrives.

Did you end up buying the bolts from the US? Which of your cars were you considering this for?

Robert

cake eater

1,326 posts

197 months

Friday 2nd October
quotequote all
There's a possibility of a group buy. You'll need to contact Hughesie on this forum. He's been looking at getting a titanium set made.

Wolfgang is an option but he wouldn't sell me just the mounting hardware. I did buy a refurbished set of fronts from him. My old set of brakes cracked when he was drilling out the bolts making them useless, so even someone with experience gets caught out.

The make up TQ for the bolts is 8nm for Wolfgang's hardwear. Some say 10nm for OEM. Torque up pattern is star.

belfry

Original Poster:

1,076 posts

213 months

Friday 2nd October
quotequote all
Many thanks for your reply Cake. My plan is to remove the front disks this weekend to check the condition and weigh the disks.

I will contact Hughsie to see what progress he’s been able to make on titanium bolts.

Eatpies99

202 posts

85 months

Monday 5th October
quotequote all
Wish this was a couple of years ago before mine cracked due to the bolts haha.

belfry

Original Poster:

1,076 posts

213 months

Tuesday 6th October
quotequote all
FYI, My front disks are 25% worn (75% remaining) at 31,000 miles.

Hughesie

12,802 posts

313 months

Friday 23rd October
quotequote all
@Belfry, Autofficina now have a stainless bolt solution for the disks to replace the crappy mild stainless ones.

Speak to Peter - https://www.instagram.com/autofficinaparts/

cgt2

7,492 posts

219 months

Friday 23rd October
quotequote all
Hughesie said:
@Belfry, Autofficina now have a stainless bolt solution for the disks to replace the crappy mild stainless ones.

Speak to Peter - https://www.instagram.com/autofficinaparts/
Beat me to it was about to post the same.

belfry

Original Poster:

1,076 posts

213 months

Sunday 1st November
quotequote all
Has anyone changed their original bolts for these yet?

I'm interested to know how easy the old bolts will be to remove.

_Rodders_

5,228 posts

50 months

Sunday 1st November
quotequote all
cgt2 said:
Hughesie said:
@Belfry, Autofficina now have a stainless bolt solution for the disks to replace the crappy mild stainless ones.

Speak to Peter - https://www.instagram.com/autofficinaparts/
Beat me to it was about to post the same.
£1400 for a few bolts? Wouldn't that cause the sleeves to corrode even more quickly?

belfry

Original Poster:

1,076 posts

213 months

Monday 2nd November
quotequote all
F355GTS said:
It's also quite likely the the bolts won't simply come out, they are in sleeves which rust to the bolts and these sleeves expand cracking the discs
As explained by @F355GTS the sleeves (or bobbins) that the new bolts will go through seem to be an issue. I'd love to hear from anyone who has experience of changing the bolts AND the sleeves.

F355GTS

3,875 posts

286 months

Monday 2nd November
quotequote all
belfry said:
F355GTS said:
It's also quite likely the the bolts won't simply come out, they are in sleeves which rust to the bolts and these sleeves expand cracking the discs
As explained by @F355GTS the sleeves (or bobbins) that the new bolts will go through seem to be an issue. I'd love to hear from anyone who has experience of changing the bolts AND the sleeves.
One of the guys in a 458 group replaced his with these and apaprently they've been absolutely fine, a much cheaper solution than £1400!!

https://boltworld.co.uk/products/m6-hexagon-unserr...

https://www.fusionfixings.co.uk/products/m6-x-55mm...

belfry

Original Poster:

1,076 posts

213 months

Wednesday 4th November
quotequote all
See my other post which now has photos of the cross section of the CCM disk with rusty sleeve and bolt. https://www.pistonheads.com/gassing/topic.asp?h=0&...

The mounting bolts were effectively welded into the sleeve. The Rusty sleeve in turn is permanently welded to the carbon material. The only good news about this, is that those who have lost one or more of the heads of the mounting bolts on the rear of the disc need not fear about The disc ever coming loose! I hammered the end that previously held the nut in order to try to force them back back through the disc, but there is no way that these are letting go.
More photos here: https://www.pistonheads.com/gassing/topic.asp?h=0&...

cake eater

1,326 posts

197 months

Yesterday (17:11)
quotequote all
belfry said:
See my other post which now has photos of the cross section of the CCM disk with rusty sleeve and bolt. https://www.pistonheads.com/gassing/topic.asp?h=0&...

The mounting bolts were effectively welded into the sleeve. The Rusty sleeve in turn is permanently welded to the carbon material. The only good news about this, is that those who have lost one or more of the heads of the mounting bolts on the rear of the disc need not fear about The disc ever coming loose! I hammered the end that previously held the nut in order to try to force them back back through the disc, but there is no way that these are letting go.
More photos here: https://www.pistonheads.com/gassing/topic.asp?h=0&...
That's just amazing and scary yikesflames

There's no drilling that out!!!