A110 GTS underbody treatment
A110 GTS underbody treatment
Author
Discussion

extinct

Original Poster:

62 posts

12 months

Yesterday (10:34)
quotequote all
My GTS is brand new, with ~500km on it
With winter at the doorstep here in Germany, I m only doing short, easy weekend getaways, till I hit the breakin period of 5K km, after which I ll do the first oil change and subsequently progressively longer, more spirited drives

Won't be driving the car on snow and also avoid rain as much as possible

Regarding trim protection, the car has undergone full PPF (Ultimate Plus) + Fusion ceramic ontop

Now I m considering if its worth to treat the underside of the car
Even though I won't be driving on snow, it will almost certainly been exposed to some extend during the winter to the salts they ll throw on the road, because even after snow goes away, it would take time for the chemicals to wash off. And I don't want to have the car sitting idle too long in the garage

Already looked into possible products and concluded that Dynax-UC is possibly the one to go for
Then the question is whether its worth removing the under plate or just treat the exposed iron components (e.g. wishbones)
There's also the consideration that applying aftermarket underbody coatings near corrosion-prone areas could complicate warranty claims if paint bubbling appears later, so maybe it makes more sense to limit Dynax applications strictly to suspension arms, bolts, and underside hardware
That's about the rust part, which fortunately shouldn't be a major concern on this car

Regarding the corrosion consideration - is there any preventative countermeasure that I could consider (I plan to keep this car in the longer term - so that I don't say 'forever' smile)
I know that corrosion has to do with the quality of the paint finish and that not much can be done in advance to prevent it, but if there's little something, I would like to know

Thank you in advance!

Edited by extinct on Sunday 15th November 10:44

jont-

221 posts

120 months

Yesterday (13:51)
quotequote all
IIRC the wishbones are aluminium, so not a problem.

Bits to worry about....
Jacking points - these are mild steel. The salt kicked up by the tyres will blast the leading edges and lead to rusting. I've tried covering in PPF but struggled to get it to stick, so current treatment is dinitrol. Not planning to use this one in the winter so much so hopefully not such a concern.

Suspension bolts/nuts/pickup points - I think these are steel and will rust/corrode.

there's a bunch of mild steel brackets behind the rear hubs where the paint isn't particularly well applied.

Undertray bolts - are steel while the panels are aluminium. You'll get dis-similar metal corrosiion. Consider using something like Duralac to coat between the washers and the undertrays and copaslip the bolts.

It's not that hard to get the wheel arch liners out and get some dynax UC or similar behind them, but equally not sure how much there really is to corrode.

If you've got adjustable suspension you might find the adjusters sieze.

HTH,

Jon

extinct

Original Poster:

62 posts

12 months

Yesterday (19:34)
quotequote all
Thank you for the input Jon, very useful

I ve already reached out to some local workshops, see if they could help me with this application (in a cost-efficient way)

Like I said, I don't plan to remove the undertray and don't wanna risk anything that could void the warranty

I ll enquire to at least check if replacing the bolts is 'OK': https://life110.co.uk/products/life110-a110-lightw...