AJP Dash - free Android dashboard for TVR AJP engines
Discussion
Hi all,
Like many of you I used RS-AJP to read my MBE ECU, but it no longer works on recent Android phones. So I built a replacement: AJP Dash, a free app that talks to the ECU over the standard diagnostic lead.
What it does:
It's an APK, so allow installs from unknown sources. No ads, no account, no internet permission. APK is available via the following post:
Changelog:
Newest first. Install a new version straight over the previous one; settings and learned gears are kept.
1.25 17 Nov 2026
Feedback welcome!












Like many of you I used RS-AJP to read my MBE ECU, but it no longer works on recent Android phones. So I built a replacement: AJP Dash, a free app that talks to the ECU over the standard diagnostic lead.
What it does:
- Live dashboard: rev counter, GPS road speed, and a gear indicator that learns your gearbox by itself
- G-meter using the phone s own sensors
- Three tiles you choose yourself (water, oil pressure, battery, lambda, injector duty cycle, ) with min/max
- Live and logged fault codes, with a counter showing how often a fault appeared (handy for intermittent sensors)
- Adaptive fuel maps for both banks as a heatmap, with the cell the engine is using right now
- Fault, service-interval, adaptive and throttle resets (with confirmation)
- Checks against TVR's factory reference values
- Engine history with lifetime records on 6 items (time spent per engine speed, above the rev limiter, per coolant and intake temperature, per throttle position and per battery voltage
- CSV logging, oil-pressure warning (S6), built-in help, English and Dutch
- Android 8 or newer
- A USB-OTG adapter, a USB-RS232 cable (FTDI, Prolific, CH340 or CP210x) and the usual TVR diagnostic lead. An RSiAJP BLE232 Bluetooth adapter also works.
- Tested on my 2003 T350C (Speed Six, MBE 941) and checked against logs from AJP Diagnostics and the MBE software.
- The V8 is recognised as well and tested by Cerbera owners.
It's an APK, so allow installs from unknown sources. No ads, no account, no internet permission. APK is available via the following post:
Changelog:
Newest first. Install a new version straight over the previous one; settings and learned gears are kept.
1.25 17 Nov 2026
- New: checks against TVR's factory reference values (Status page), taken from the help files of the original TVR ECU Diagnostics software. While connected, the app looks for:
- coolant or intake temperature readings that jump for a moment (typically a loose sensor plug or wiring);
- the ECU's substitute values for a failed sensor (coolant stuck at 95 °C, intake air at 10 °C);
- one throttle sensor being substituted by the other (TP1 and TP2 exactly equal while moving);
- throttle sensors out of balance (more than 5 % apart at steady throttle);
- warm idle injection above 2.7 ms (factory: 2.2 2.4 ms);
- a lambda sensor that stops switching when warm;
- both radiator fans off above 96 °C (they should switch on at 92 °C).
- Help updated.
- Engine history charts now have axis values (e.g. 0 · 2000 · · 10000 rpm).
- Full counters are shown in amber. The ECU's counters are 16-bit and stop when full (1 h 35 min per rpm band, 12 h 43 min per temperature band), so totals are minimums. That explains a seemingly short running time.
- Engine history also available on Speed Six ECUs 9410090, 9410100 and 9410101.
- Prolific (PL2303) USB cables no longer drop the connection after reading maps or history.
- ECU IDs with an extra variant digit are recognised (e.g. 94130116 = software 9410116, 92810270 = 9280270).
- V8 with ECU 9280270: bank 2-4-6-8 adaptive map is read from its correct address. Other tools show a page of meaningless ±100 % values for this ECU; the original TVR software confirms the address.
- New: Engine history (Status page, Speed Six). The ECU keeps lifetime records of time spent per engine speed, above the rev limiter, per coolant and intake temperature, per throttle position and per battery voltage. The app reads them (read-only, nothing is reset), shows what a drive added since the previous read, and exports them to CSV.
- ECU resets (fault codes, service interval, adaptive maps, throttle) now check the ECU's confirmation, like the original software, and tell you if the ECU answered unexpectedly.
- Oil pressure hidden on ECUs that don't measure it (V8, early Speed Six 9410034/9410035).
- V8: automatic fallback to the alternative bank 2 map address.
- New unit option "UK": °C, mph, psi, mbar.
- Maps: rpm labels aligned with their columns; impossible map contents (beyond ±40 %) are flagged.
- V8 adaptive maps verified against AJP Diagnostics on two cars.
- Live dashboard, all sensors with min/max, fault codes, adaptive maps with live cell, CSV logging, demo mode.
- G-meter, self-learning gear indicator, selectable drive tiles, oil pressure warning (Speed Six), injector duty cycle, fault counters, alert beep, full-screen portrait and landscape.
- USB cables (FTDI, Prolific, CH340, CP210x) and Bluetooth LE (RSiAJP BLE232 adapter).
- Speed Six and V8 aware (cylinder banks 1-3-5-7 / 2-4-6-8), ECU identification, English and Dutch, in-app help.
Feedback welcome!
Edited by dekoene on Sunday 15th November 17:46
Edited by dekoene on Sunday 15th November 17:50
Edited by dekoene on Tuesday 17th November 11:00
Koen thanks for going to the effort in developing this and the generosity of freely sharing it.
Downloaded no problem just can't connect but that's almost certainly down to the 'fancy' usb lead with built-in chip set to bare wires I've terminated into the 3 pin connector trying to eliminate some connections
Downloaded no problem just can't connect but that's almost certainly down to the 'fancy' usb lead with built-in chip set to bare wires I've terminated into the 3 pin connector trying to eliminate some connections

Gassing Station | Tuscan | Top of Page | What's New | My Stuff


