Amp / Speaker pairing
Discussion
Hey guys. I'm seeking some opinions with folks familiar with 80s hifi.
Most of my casual listening is with Sonos these days, I have a couple of Era 300s that do just great in a medium sized living room.
However, I love vintage tech and like to play around with cassette and CD, especially to snag releases that have not / will never be released on streaming due to the usage rights being complex etc. So it's much more about occasional enjoyment, aesthetics, collecting than building a day to day setup.
With that out of the way, I've got an opportunity to pick up some Spica TC-50 speakers. Not sure if these are well known in the UK but they are an iconic American-made set of hifi speakers, with a unique look that need very specific room placement. Quirky and weird, right up my alley. I would be using them with a vintage 80s Cyrus 1 amp. The speakers like 4ohms, and the 1 can do 40w per channel at 4 ohms which seems perfect....but I know these things can be trickier than they first seem.
Any drawbacks I should be aware of?
Most of my casual listening is with Sonos these days, I have a couple of Era 300s that do just great in a medium sized living room.
However, I love vintage tech and like to play around with cassette and CD, especially to snag releases that have not / will never be released on streaming due to the usage rights being complex etc. So it's much more about occasional enjoyment, aesthetics, collecting than building a day to day setup.
With that out of the way, I've got an opportunity to pick up some Spica TC-50 speakers. Not sure if these are well known in the UK but they are an iconic American-made set of hifi speakers, with a unique look that need very specific room placement. Quirky and weird, right up my alley. I would be using them with a vintage 80s Cyrus 1 amp. The speakers like 4ohms, and the 1 can do 40w per channel at 4 ohms which seems perfect....but I know these things can be trickier than they first seem.
Any drawbacks I should be aware of?
I've never heard a pair, but looking at the specs for them that I've found online they are very inefficient by modern standards (figures of 82db and 84 db sensitivity seen).
I wouldn't worry about the 4 ohm impedance, firstly it's a nominal value (impedance various with frequency) and 4 ohm nominal speakers are everywhere.I'm a big fan of Dynaudio speakers and pretty much all their speakers are 4 ohm.
They will almost certainly work OK at low volume levels with your Cyrus 1, the problem will come if you try to push them hard, the amp could end up going in to distortion (or even protection) which could result in destroying drive units which are almost certainly irreplaceable.
There's a good recent review here -
https://www.audioresurgence.com/2025/09/spica-tc%E...
Which as well as a review has a section on what to look for when buying a pair.
I wouldn't worry about the 4 ohm impedance, firstly it's a nominal value (impedance various with frequency) and 4 ohm nominal speakers are everywhere.I'm a big fan of Dynaudio speakers and pretty much all their speakers are 4 ohm.
They will almost certainly work OK at low volume levels with your Cyrus 1, the problem will come if you try to push them hard, the amp could end up going in to distortion (or even protection) which could result in destroying drive units which are almost certainly irreplaceable.
There's a good recent review here -
https://www.audioresurgence.com/2025/09/spica-tc%E...
Which as well as a review has a section on what to look for when buying a pair.
I would just run them and see how you get on.
I think it was John Bower, or something like that who designed them back in the day, same sort of design principle as John Dunlavey, matched crossover and drivers and time aligned drivers, done by positioning, so in the normal listening room you get a nicely timed holographic image.
I was think the caps would need replacing but they will be really cheap and dead easy to swap out.
Be interesting to hear your thoughts on them.
I would look at maybe picking up a cheap Rel T7 ir similar, I bet with a sub that can keep up they would give a stunning performance.
I think it was John Bower, or something like that who designed them back in the day, same sort of design principle as John Dunlavey, matched crossover and drivers and time aligned drivers, done by positioning, so in the normal listening room you get a nicely timed holographic image.
I was think the caps would need replacing but they will be really cheap and dead easy to swap out.
Be interesting to hear your thoughts on them.
I would look at maybe picking up a cheap Rel T7 ir similar, I bet with a sub that can keep up they would give a stunning performance.
Deranged Rover said:
Great speakers and you don t see them very often! The Cyrus should do fine but you ll probably wake them up with a bit more power.
Please don t ruin them by adding a REL.
Go on then? Please don t ruin them by adding a REL.
Why not use a sub, or a Rel?
Those speakers only go down to 65hz.
The orginal Cyrus amp is also an incredibly lean sounding too.
I would imagine that combo is around £300 max used. So something used for a couple of hundred quid or so doesn't leave a great deal that will keep up with those well enough.
So the seller accepted my offer but we realized we live the WORST route away from one another...just horrendous traffic.
It might take a minute but I'm gonna get this, and it will be fun to set up and play around with.
These little pyramids remind me of Total Recall and are an upgrade on the MB Quart 250s I currently have (but have been recruited as gaming speakers for an old 80s Sony CRT playing arcade boards).
It might take a minute but I'm gonna get this, and it will be fun to set up and play around with.
These little pyramids remind me of Total Recall and are an upgrade on the MB Quart 250s I currently have (but have been recruited as gaming speakers for an old 80s Sony CRT playing arcade boards).
Gassing Station | Home Cinema & Hi-Fi | Top of Page | What's New | My Stuff


