Converting battery LED Christmas Lights to mains power
Converting battery LED Christmas Lights to mains power
Author
Discussion

S1975

Original Poster:

63 posts

105 months

I’ve got some Christmas garlands with 100 LEDs, powered by 4 AA batteries (6V, 0.5W).

I’d like to convert them to mains power and ditch the battery box and controller. Don’t need any flashing effects, just permanently on when plugged in.

Happy to rewire. Can I simply use a 6V DC adaptor, or is there more to it?

Any advice appreciated!

ARH

2,199 posts

270 months

just connect a 6v psu to the battery contacts is the easiest way, rewiring them and powering them directly will require resistors and stuff, and working out what power to send down each of the 3 wires will keep you busy for a while.

E-bmw

13,663 posts

183 months

Amazon/ebay etc also do many different versions of these for ease.

https://www.ebay.co.uk/itm/394294861878?_skw=batte...

The Three D Mucketeer

7,538 posts

258 months

Couldn't you get a USB charging plug and lead , chop the usb end off and use the wires ? ... 5V maybe 1.5 amps might work ? DC I assume

OutInTheShed

14,982 posts

57 months

A USB phone charger is probably the easiest, an old low power simple one.

4 alkaline AA's is 6V, but 4 rechargeables is often 4.8V.

I have various random wall warts from long departed gadgets, I expect most people would find something.

If all else fails, I'd use something like a 9 or 12V wall wart and a DC-DC down converter, which would be a couple of quid on ebay.

Or you can buy a new set of lights to run from USB quite cheaply...