swirl marks in paint
swirl marks in paint
Author
Discussion

JerseyRS

Original Poster:

46 posts

284 months

Saturday 29th October 2005
quotequote all
Hello to all,
I have a flat black 996T, which has good paintwork without dings and scratches but with lots of swirl marks on the paintwork almost as if the previous owner used (Horror!) a car wash often!! What is the best method of removing these...Should I have it machine polished or is there a better way?

Thanks, Rich

Glenn McMenamin

2,305 posts

265 months

Saturday 29th October 2005
quotequote all
Try the 3 stage process of Zymol.

It goes something like this....

1. clay, which takes all surface residue off car

2. deep cleans, which does what it says.

3. wax, they do lots of them, and are expensive, but give a deep lush shine, try Titanium, or Glassur, i think a double coat should build up a good coat, and should sort out thise swirls.


I did this yesterday, over 3 hours of work, but results are worth it IMHO

johnnywishbone

1,171 posts

249 months

Saturday 29th October 2005
quotequote all
hi there !
if you use zymol make sure you apply and remove it all in straight lines (no circles) look on our web site @www.specialistcarsltd.co.uk and go to the zymol section ! there is a instruction section there !

arwebs

2,939 posts

277 months

Saturday 29th October 2005
quotequote all
Use Meguiar's Scratch X

993rsr

3,652 posts

276 months

Saturday 29th October 2005
quotequote all
Zymol is a waste of time for swirl marks. You need to get the car 'mopped' to remove the swirl with a product such as 3M:

www.3m.com/us/auto_marine_aero/aad/solutions/ent_swirl.jhtml

I had swirl marks on my flat black 993GT2 and had it detailed by www.miracledetail.co.uk who used 3M product prior to zymol. Awesome results.

burzel

1,084 posts

271 months

Saturday 29th October 2005
quotequote all
Back from hols then rsr,i hope you have flushed your liver and kidneys well.
I tried the zymol swirl stuff,did not work.you can work by hand with diff grades of 3m rubbing paste,then zymol/swissol polish.

cuneus

5,963 posts

269 months

Sunday 30th October 2005
quotequote all
As other have said and I second (or third) Zymol is a waste of time

Use 3M finesse-it

vic cohen

2,078 posts

267 months

Sunday 30th October 2005
quotequote all
I use Zymol for finishing but 3m Finesses is the greatest thing to get the swirls out , could only get mine from a bodyshop .....................some do say my car looks pants though

burzel

1,084 posts

271 months

Sunday 30th October 2005
quotequote all
Hey vic
It does not look pants,but its related in a small way.
Its looks the bollox,or the mutts nuts.
Of which i suppose you can cover with a thong,may be a leopard skin one,i will see if i can find one to hang off your rear end!!

993rsr

3,652 posts

276 months

Sunday 30th October 2005
quotequote all
Burz, both organs have been well irigated thanks, waiting for their next pounding on the 9,10 & 11 Nov, roll on the cheap plonk eh!

Are you and greyhound planning to meet me and IMOM at the tunnel again? Let us know and we'll talk before then. GT in bits at the mo!

miracle

389 posts

261 months

Sunday 30th October 2005
quotequote all
Hi All,

Everyone's up early on a sunday!

To all the people who are having problems with there paintwork, please contact me and I will pop round and give you a demonstration free of charge!

Once you have had your paintwork re-levelled by 1 or 2 microns, you will have a perfect finish like this in direct sunlight www.miracledetail.co.uk/auto-detailing-car-new.html?carID=95&imageID=1135

Kind Regards
Paul Dalton
www.miracledetail.co.uk/

vic cohen

2,078 posts

267 months

Sunday 30th October 2005
quotequote all
Guys, an offer like that from Miracle IS too good to miss , he did rsr and my mate Bens Viagara blue car ........stunning
Burzel U aint hanging anything there !!!!!!!!!!!!!!