Hope this isn't one of ours.......

[silverback mike]

If not, it may be a good source of parts.

http://www.dhales.co.uk/cgi-bin/osa/ViewPage.cgi?templateName=item_form.htx&itemNumber=567640

[steve j]

that must have hurt.

[Big Ian]

The wheels look good. I suspect there may be a flat spot on the tyres though

[dlspoo]

don't even want to look at it? Poor little tiv, hope person driving it was alright?

[rag-top]

That poor little red number has a new owner and it won't be used as parts as I plan to totally rebuild, including prefabricating a new chassis.
I was going to do a kit but I've loved the TVR S for years.
I could do with some help sourcing parts though. Nylon bushes and bits

[Pies]

www.tvrcarpats.com
for a start

[bugsy]

rag-top said:

That poor little red number has a new owner and it won't be used as parts as I plan to totally rebuild, including prefabricating a new chassis. I was going to do a kit but I've loved the TVR S for years. I could do with some help sourcing parts though. Nylon bushes and bits

Where abouts in Hertfordshire are you mate?

[Roy C]

Pies said:

www.tvrcarpats.com for a start

...or even www.tvrcarparts.com

[rag-top]

Where abouts in Hertfordshire are you mate?[/quote]

I'm in a littel place called Wiggington North Herts

Thanks to all for parts website

[mmickgoodall]

Good luck with the rebuild. Many hours of fun in the garage this winter by the looks of it.
I think David Gerald TVR can supply a new chassis if you need one. I got a quote a couple of years ago when I rebuilt mine and they were able to get them then. He also supplied all the bushes and most of the other bits I needed, mostly by return of post.
Certainly knows his TIV's

All the best Mick.

[petclub]

Dean, this link may be of use to you as well. You should find a downloadable pdf parts catalogue.

www.rtracing.co.uk

[petclub]

Sorry, the pdf is on their home page, which should be this link

www.rtracing.co.uk/40000/info.php?p=2&pno=0

[rag-top]

Hi all, just to let you all know I've had a good look at her today and its not all bad. It looks like this went under something as most of the damage is at the top, chassis is ok but the O/S upper wish is bent. Lower part looks ok but it's not had a very nice owner so hasn't been looked after. Lots of rust but she starts. Engine hasn't gone back as the mounts are still ok
One thing I need to know is how the bonnet connect can anyone send me a pic.
Thanks for the pdf link.

[spivvy]

not sure if this helps



bonnet has a single bolt which fit into the end of the front bar on the picture

the grey ends on this one



>> Edited by spivvy on Sunday 6th November 19:16

[rag-top]

Thanks for the pics. have you got a pic of the bonnet when it is connected to the chassis. also the rad housing looks different to mine as the top part of mine is made of fibre, yours look like metal. am I missing something or is this one of them design changes that TVR do.

[spivvy]

rag-top said:

Thanks for the pics. have you got a pic of the bonnet when it is connected to the chassis. also the rad housing looks different to mine as the top part of mine is made of fibre, yours look like metal. am I missing something or is this one of them design changes that TVR do.

there are lots more pictures on
www.tvrs3.co.uk under The body Lift

also pics of hinges