Headlight bulbs.

[groucho]

Just changed mine. What a f***ing pain in the arse. Could they make it any harder to change a bulb?

Wheel off, panel off, fiddly wires and bits of metal, nearly impossible to get the old sealant off, put new sealant on and then half the screws won't do up tightly.

didn't enjoy that one bit. It worked though.

[2 Smokin Barrels]

groucho said:

Just changed mine. What a f***ing pain in the arse.

Should have put some vaseline on it first

[bluebottle]

Why do you have to take the wheel off?
I have had two Griffs and in both cases, turning the wheel out on full lock gives ample space to get a screwdriver on the cover plate screws.

[bluebottle]

Why do you have to take the wheel off?
I have had two Griffs and in both cases, turning the wheel out on full lock gives ample space to get a screwdriver on the cover plate screws.

[groucho]

bluebottle said:

Why do you have to take the wheel off? I have had two Griffs and in both cases, turning the wheel out on full lock gives ample space to get a screwdriver on the cover plate screws.

It was bloody hard enough with the wheel off.

[VSP90]

Can brighter more powerful bulbs be fitted to the standard wiring? If so what spec? Thanks.

>> Edited by VSP90 on Tuesday 22 November 12:36

>> Edited by VSP90 on Tuesday 22 November 12:36

[97octane]

See here www.pistonheads.com/gassing/topic.asp?t=205829&f=9&h=0