Wheel bearing removal ?
Wheel bearing removal ?
Author
Discussion

piooly

Original Poster:

1,176 posts

256 months

Wednesday 23rd November 2005
quotequote all
Does anyone have any instructions for the elise on how to remove a rear wheel bearing?

jke11y

3,200 posts

268 months

Wednesday 23rd November 2005
quotequote all
www.tadts.com/tasks/Task10003/index.html

They sell them as well. Hope that helps!

cheekymonkey

1,139 posts

255 months

Wednesday 23rd November 2005
quotequote all
i've done bearings but not on the elise, basically you need a "bearing pusher" tool that cleanly whips it out of the hub & is also used for pushing the new one in nice & square. i got so hacked off trying to do it myslef i took the hub to my local garage at the time and they did it all for free greased up & all as it only takes a couple of mins with the right tool

steff

1,421 posts

294 months

Thursday 24th November 2005
quotequote all
What cheekymonkey said

>> Edited by steff on Thursday 24th November 13:13

piooly

Original Poster:

1,176 posts

256 months

Friday 25th November 2005
quotequote all
bearing replaced now. That was quite a task !!!!

Got the hub off no problem but there was no way the bearing was going to come out. Nipped to a local back street garage I know. Took him 40 minutes to get the old bearing out and fit the new one and thats will the proper equipment !!! He only charged me £5 !! great place ! All now re-assembled and all the noise has gone. Just cant believe how worn out it was, it would hardly turn!! and to be in that state after 26,000 miles! previous owner must have tracked it a lot !

Next on the list is the fuel filter and brake fluid change. Any tips anyone??

TheYeti

656 posts

247 months

Sunday 8th April 2007
quotequote all
Sorry to dig up a REALLY old post guys, but I am going to need to change a front bearing pretty soon and was going to get one from Eliseparts..........but then I found a few threads on this and got the idea that it isn't that easy to do unless you have the proper removal tool. Does anyone know where I can get a bearing removal tool from? Eliseparts has a ball joint removal tool, but not a bearing removal tool. Does one exist? If so, any ideas where from and how much?

Any help on this would be good help. Cheers guys.

tricky 100

954 posts

273 months

Sunday 8th April 2007
quotequote all
You need a large press , not really feasible to have at home .Take the hub off and get a garage to remove the bearing .

TIPPER

2,955 posts

250 months

Sunday 8th April 2007
quotequote all
Whatever you do don't get a Lotus dealer to replace the bearing for you.
I just stumped up £420 for two!!

TheYeti

656 posts

247 months

Sunday 8th April 2007
quotequote all
TIPPER said:
Whatever you do don't get a Lotus dealer to replace the bearing for you.
I just stumped up £420 for two!!


Don't worry! I will be doing them myself, with some help from my Dad!!!

Any work I can do without having to pay out STUPID and indefensible labour charges, I will!!!

piooly

Original Poster:

1,176 posts

256 months

Monday 9th April 2007
quotequote all
TheYeti said:
Sorry to dig up a REALLY old post guys, but I am going to need to change a front bearing pretty soon and was going to get one from Eliseparts..........but then I found a few threads on this and got the idea that it isn't that easy to do unless you have the proper removal tool. Does anyone know where I can get a bearing removal tool from? Eliseparts has a ball joint removal tool, but not a bearing removal tool. Does one exist? If so, any ideas where from and how much?

Any help on this would be good help. Cheers guys.



you will be able to remove the hubs pretty easily. Just make sure you have a very long ratchet spanner to remove the hub nut. They are on silly tight !!!!, it should come appart pretty easily. You will need a press to press the old bearing out and to press the new bearing in with. I took my hubs to a little local garage who had a press, They charged me £5 to take them out and put the new ones in. Overall, an easy job but the long ratchet spanner is vital !!!!!! and ofcourse the press !

Good luck.

M11RT P

23 posts

271 months

Tuesday 10th April 2007
quotequote all
I have a bearing that is on it's way out !! just started making a noise - where did you buy your bearings from - should I go stright to the OEM (Lotus)?

Someone said the're the same Pn front and rear, is this correct?

TheYeti

656 posts

247 months

Tuesday 10th April 2007
quotequote all
Eliseparts.com..............the way to go! Or Elise-Shop.com, but thats in Euros........

DON'T go Lotus OEM...........silly money.........

M11RT P

23 posts

271 months

Tuesday 10th April 2007
quotequote all
Many thanks Yeti

piooly

Original Poster:

1,176 posts

256 months

Wednesday 11th April 2007
quotequote all
M11RT P said:
Many thanks Yeti



Yes eliseparts, and the front and rear are the same, always change the axsle too, not you one, so if the front left is gone, also do the front right.