seat belt pretensioner
Discussion
My seat got wet (fitting hands free kit) and now I have "the light" - its a small component which I am lead to believe is quite cheap. But fitting and labour will take it to £200+ at your local $tealer.... try GSF or Euro car parts first.... might have one available.
Oh, and sorry there is a sensor in the seat which is common to fail (you sit on it!) or it could be in the bottom part of the seat belt mechanism. If its the seat belt mechanism then its time and effort, if its the seat is a simple job. Either way its just hours to fix rather than major cost. Common fault and as I mentioned, mine got wet and hence came up as a fault - not a problem now (dry!) but cant reset the light without a tool.... gits....
>> Edited by off_again on Monday 28th November 17:27
Oh, and sorry there is a sensor in the seat which is common to fail (you sit on it!) or it could be in the bottom part of the seat belt mechanism. If its the seat belt mechanism then its time and effort, if its the seat is a simple job. Either way its just hours to fix rather than major cost. Common fault and as I mentioned, mine got wet and hence came up as a fault - not a problem now (dry!) but cant reset the light without a tool.... gits....
>> Edited by off_again on Monday 28th November 17:27
Just found this old thread regarding seat belt pre-tensioners and have a query to put to anyone who might know...
My sister recently bought her first car and I was looking at it for her over the weekend. I spotted what looks like some front end damage (presumably from a shunt some time ago), and although the SRS light isn't staying on (it does come on with ignition as it should), the seat belt buckles look lower than they should and are ridged. This makes me suspect the car's had a shunt in the past and been repaired.
My question is, should the car pass an MOT in this condition, or are pre-tensioners not part of the test (assuming the SRS light isn't illuminated)?
The person she acquired the car from had it 4 years and said it had not been a problem in past MOT's, and the car doesn't look like it's been recently repaired (ie since last MOT)...
Any thoughts?
My sister recently bought her first car and I was looking at it for her over the weekend. I spotted what looks like some front end damage (presumably from a shunt some time ago), and although the SRS light isn't staying on (it does come on with ignition as it should), the seat belt buckles look lower than they should and are ridged. This makes me suspect the car's had a shunt in the past and been repaired.
My question is, should the car pass an MOT in this condition, or are pre-tensioners not part of the test (assuming the SRS light isn't illuminated)?
The person she acquired the car from had it 4 years and said it had not been a problem in past MOT's, and the car doesn't look like it's been recently repaired (ie since last MOT)...
Any thoughts?
Yeah appreciate it's hard to comment without a pic. Will try and add one.
On most cars there is some movement in the buckle, however both are rock solid and seem very low, but to be honest I have no basis for comparison, other than looking through the window of another car!
Also, I apologise for straying into the BMW General forum... my google search brought me here and in my haste I replied to a previous thread! This is a Ford Ka (... should I run for the hills?) but surely most buckles / pre-tensioners work in a similar way?
On most cars there is some movement in the buckle, however both are rock solid and seem very low, but to be honest I have no basis for comparison, other than looking through the window of another car!
Also, I apologise for straying into the BMW General forum... my google search brought me here and in my haste I replied to a previous thread! This is a Ford Ka (... should I run for the hills?) but surely most buckles / pre-tensioners work in a similar way?
Gassing Station | BMW General | Top of Page | What's New | My Stuff


