what battery for cerbera
Discussion
I’ve just recently changed my battery - although the 072 and 069 are the ones I believe that fit. (Mainly the lugs to go under the wing) I can't remember the make - will check – I bought from ATS, ₤60, was slight wider (longer when fitted in the cerb) meant I had to remove the plate that held it in place – consequently filled holes with silicone. The battery cover is a little tight, had move the main power cable around
www.atseuromaster.co.uk/products/batteries.htm
The one I bought had 550 cranking amps – starts with loads of power, and 3 year guarantee.
Hope this helps
Dean
www.theRATPAC.com
www.atseuromaster.co.uk/products/batteries.htm
The one I bought had 550 cranking amps – starts with loads of power, and 3 year guarantee.
Hope this helps
Dean
www.theRATPAC.com
danfrith said:
cheers guys! is it true you have to re-set the ECU after fitting battery? i cant see why, as you dont after a jump start etc?
cheers
Well i did'nt reset anything, and it seems to work OK i.e it starts and it moves and still goes very fast
Word of advice for the battery - simply take your old one in with you and ask for an exact replica in terms of shape, measurements and power. Or better still, just get you local indie TVR garage to do it for you
Gassing Station | Cerbera | Top of Page | What's New | My Stuff


