Cerbera 4.2 Parts for Cam Fitting
Cerbera 4.2 Parts for Cam Fitting
Author
Discussion

peter_melichar

Original Poster:

52 posts

260 months

Friday 2nd December 2005
quotequote all
Hi guys,
My indie is fitting new camshafts to my 1997 Cerbera 4.2. TVR have got the cam shafts but the factory is apparently out of stock on the washers, plugs and circle clips that are needed to fit the cams.

Any thoughts where I could get these from other than TVR directly ?

Many tx
P

trackcar

6,453 posts

255 months

Friday 2nd December 2005
quotequote all
It doesn't matter if they're out of stock of those items as none of them are needed when fitting cams .. you need:

2 cams
16 followers

.. erm that's it!

peter_melichar

Original Poster:

52 posts

260 months

Friday 2nd December 2005
quotequote all
oh, tx....my technical understanding of the AJP engine obviously shined through there -

thanks !

gazzab

21,632 posts

311 months

Friday 2nd December 2005
quotequote all
Is your indie a cerb/TVR specialist?

kojak

4,547 posts

282 months

Friday 2nd December 2005
quotequote all
gazzab said:
Is your indie a cerb/TVR specialist?


Looks like no.

gazzab

21,632 posts

311 months

Friday 2nd December 2005
quotequote all
gosh - I need to change my cerbera dictonary. I have always associated the term 'indie' with independant mechanics who have loads of experience with TVRs/Cerbs and who specialise in the servicing and fixing of them.

APMAUTO

368 posts

295 months

Friday 2nd December 2005
quotequote all
sounds like you need the blanking plugs for the rear of the cams,i'll have a look in the morning to see if i've got any left.

regards andy

trackcar

6,453 posts

255 months

Friday 2nd December 2005
quotequote all
All the cams ive ever fitted had them in already .. is this a cunning way of saving money at the factory? .. or just take them out of the cams you're changing?

plasticman

908 posts

280 months

Friday 2nd December 2005
quotequote all
The cams I just bought didn`t have them in but they did supply them.

APMAUTO

368 posts

295 months

Saturday 3rd December 2005
quotequote all
looked this morning and have 1 spare set ie 4 clips 4 o rings and 4 plugs if you still need them mail me through my profile and i can arrange to post them cheers andy

peter_melichar

Original Poster:

52 posts

260 months

Sunday 4th December 2005
quotequote all
Andy, many thanks for your help. Yes, I would still require the parts. My only question is whether this 1 set will be sufficient for to fit both cams ? I mailed you my contact details through your profile. Looking forward to your reply.

tx
Pete

peter_melichar

Original Poster:

52 posts

260 months

Sunday 4th December 2005
quotequote all
gazzab said:
gosh - I need to change my cerbera dictonary. I have always associated the term 'indie' with independant mechanics who have loads of experience with TVRs/Cerbs and who specialise in the servicing and fixing of them.


As a matter of fact my indie is a TVR specialist and has tons of experience with the AJP engine. He's been servicing my Cerb for years (when still with previous owner) and for the period of my ownership (since Feb05) I have not had a single problem with the car. Would absolutely recommend the chap, especially for people who need good TVR servicing at a reasonable price in London. No need to change your 'dictionary' in any ways.