Power Commander and RR setup in Surrey?

[veetwin]

Can anyone recommend somewhere in the Surrey area that offer Power Commander installation with a rolling road setup?

The only place I can see is PDQ in Maidenhead.

[Steve_T]

These guys have racing connections - worth a try? www.stevejordanmotorcycles.co.uk/

[yoda954]

Or:

www.v60.net/index.asp

Haven't used 'em but I think Anna did for her blade



>> Edited by yoda954 on Thursday 8th December 17:15

[silver993tt]

I used PDQ and they were very good. Not very far away from Surrey, just 15 mins down the M4 from Jct 15 M25.

[Ewan Oozarmy]

Try www.hmracing.co.uk

Just did my KTM and were very good.

[Scott W]

What bike is it for and have you already bought the Power Commander?

[S2rr Kitty]

yoda954 said:

Or: www.v60.net/index.asp Haven't used 'em but I think Anna did for her blade >> Edited by yoda954 on Thursday 8th December 17:15

I did indeed (hello dude!! long time no see!) but I don't think they are there anymore.

[veetwin]

haven't bought the PC yet. I want the whole thing. Installation and RR.

Looks like PDQ may be the ones then.

[Scott W]

Well if it is for a Suzuki then I would not bother with a PCIII. There is a company called Dyna Pro based in Isleworth that mapped the std ECU on my Gixer 750 and a friends SV650. The total cost per bike was £60 and they check all of the air/fuelling and have greater control over the parameters than you get with the PCIII. Dyna Pro's website

I had a PCIII on my old Gixer 750 and w/out any shadows of a doubt I would go back to Dyna Pro for an ECU map.

However, if you are travelling to PDQ then you might want to consider Big CC over in Wokingham as they sell and map PCIII's. Big CC's website

[veetwin]

Thanks Scott, it is for an 05 CBR1000RR

[fergus]

Unless you have a 'kit' ECU (way more expensive than the PC III option), the only ECUs that can be interogated (i.e 'remapped') are suzuki. Standard Honda ECUs are not remappable.