Clutch rubbers

[blueone]

Fluid on left shoe this morning so anyone know where the clutch slave cylinder rubbers come from on an 89 350i.

[number 7]

If its running down the actuating rod/pedal, it'll be the master cylinder, not the slave cylinder thats gone. I personally wouldn't change the seals, since its quite possible that the bore is worn as well. I've also had the actuating rod go bendy on me - I don't think the installation geometry is ideal, and it puts undue strain on things. Last master I got from Tower View was c. £50 IIRC.

7.

[blueone]

Sorry ment master but it was early in the morning

[badredwedge]

Get hold of Richard Thorpe at RT racing 0114 2817507 about £50 plus a bit of postage

[350zwelgje]

Having same problem at the moment. Think the slave is gone. But will try new seals first (for both), if the rest is ok after inspection. Also still need to work out what to get at the moment.

Rob

[350matt]

Its off the SD1, any lucas / BL part stockist will be able to sort you out or even Rimmer bros


Matt