Anyone in Mids area fancy fitting an engine for me?

[l33]

Well guys, as the topic states, I am looking to fit a 4.5 litre engine in the wedge and am looking for someone to fit it for me (I don't have the time or room in my garage). It goes without saying that I will pay the going rate...

I am looking at putting the 3.5 litre engine on fleabay (unless anyone on this forum wants it) and swapping them over when I sell it. This ensures the perspective buyer can see the engine running.

I don't need a speedy turnround - before end of Feb / mid march would be ok as I'm not using the wedge at the moment.

Any takers (or can anyone recommend someone who does a reasonable job at a reasonable price)?

Ta

L33.

[GreenV8S]

There are plenty of people around who could take on small jobs like this, but you probably want somebody local to you so you need to be more specific about where you are.

[blaineuk]

you could try tvr autotune in barwell near hinckley, seems to know his stuff and if i had the spare cash i would have him do the clutch in mine

[gun metal]

Tallbloke is the men for the job.

[l33]

GreenV8S said:

There are plenty of people around who could take on small jobs like this, but you probably want somebody local to you so you need to be more specific about where you are.

I am near Birmingham city centre (Junction 7 of the M6). Ideally after someone fairly close by...

[Graham]

DOM at Midland Classic restorations is a possibility if your looking for a commercial concern to do it.

His rates are good and he helped fit the Rv8 into my Tuscan racer...


He's not too far from you between kidderminster and Worcester...

you can get his number from

www.midlandclassicreatorations.co.uk


if you call him say Graham Sent you, should oil the wheels

cheers

G

[brummiewedge]

Dyno Torque in Tyseley, B'ham can sort this. He has a LS1 V8 in an RX7! he did that one himself, helps me out with mine, the workshop is in my profile, taken when when the chassis was undergoing new outriggers. 0121 753 0415 ask for Craig.

[l33]

brummiewedge said:

Dyno Torque in Tyseley, B'ham can sort this. He has a LS1 V8 in an RX7! he did that one himself, helps me out with mine, the workshop is in my profile, taken when when the chassis was undergoing new outriggers. 0121 753 0415 ask for Craig.

Cheers - have spoken to Craig and he will be doing the engine swap!!!!!! How excited am I?

Will probably wait towards the end of the month and try flogging my engine on ebay first!!!

HAPPY DAYS.



>> Edited by l33 on Tuesday 10th January 14:32