Monaro wheel size?
Discussion
BO55 VXR said:
Previous thread might help
www.hsv.org.uk/topic.asp?t=233361&f=69&h=27
It may do cheers but I can't decipher what I need there unfortunately.
Thanks, but that's gobbledegook to me tbh
"Diameter, your choice!
Width (j) 8 inch, probably get away with 8.5 if you use at least 245 tyre.
PCD, 5 x 120mm
Offset (ET), 48 mm, should be able to use 45mm Centre bore, 67.something mm. Can confirm the something soon!"
Can you(or someone) maybe humour me and tell me how that would read if I was looking at a list of wheel fitments?
Thanks
"Diameter, your choice!
Width (j) 8 inch, probably get away with 8.5 if you use at least 245 tyre.
PCD, 5 x 120mm
Offset (ET), 48 mm, should be able to use 45mm Centre bore, 67.something mm. Can confirm the something soon!"
Can you(or someone) maybe humour me and tell me how that would read if I was looking at a list of wheel fitments?
Thanks
Nige, those are the figures you will see in a fitment list, unless they are listed by model, in which case you probably find the Monaro is not listed.
If you are not buying it from someone who lists it by model, those are the measurments they will need to supply the right wheels. If they don't ask those questions, beware!
Did you get my PM ?
If you are not buying it from someone who lists it by model, those are the measurments they will need to supply the right wheels. If they don't ask those questions, beware!
Did you get my PM ?
Not sure if this is any help but www.ssv.com.au list alloy wheels by fitment from VB-VY Commodores so i'd guess monaro are same PCD, not sure what it would cost to ship but would give you an idea of what you can fit
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff