Pop-up head light help!
Discussion
Hi,
One of the bolts acting as a hinge flew off at a rate of knots today! The light is now flapping around on one side. It looks like it is just a bolt that needs putting in - is there a thread on the inside of the body for this screw to hold into place? Is the best way to access this through taking the headlamp off and through?
Matt
One of the bolts acting as a hinge flew off at a rate of knots today! The light is now flapping around on one side. It looks like it is just a bolt that needs putting in - is there a thread on the inside of the body for this screw to hold into place? Is the best way to access this through taking the headlamp off and through?
Matt
Yes, there's a captive nut in the body. Just need to take the lamp unit out to access them. Don't forget to use a rubber washer(tap washer is about the right size)between the pod and the body, and don't overtighten it or the pod wont fully retract. Some of these bolts were drilled and wired in place as well, to avoid your scenario.
7.
7.
wedg1e said:
Matty Boy said:
Hi Guys,
Thanks for your help, fixed it yesterday and it works like a dream. I'm quite chuffed, I know that sounds silly but I'm not that technical when it comes to cars so removing bits and pieces to make something work again is pleasing.
You get used to it...
True..Gassing Station | Wedges | Top of Page | What's New | My Stuff



