Low profile trolley jack
Low profile trolley jack
Author
Discussion

ThatPhilBrettGuy

Original Poster:

11,810 posts

269 months

Sunday 12th February 2006
quotequote all
Any idea where I can get a cheap one? I think it amazing that you can pick up a 'normal' one for less than £20 but the cheapest I've found for a low profile one is £150! They can't be that different surely?

Thanks

Phil

actech

693 posts

296 months

Sunday 12th February 2006
quotequote all
Is it for the Noble? If so you don't need a low profile one. Halfords do a 2 ton one that fits underneath if you take the rose off, alternatively you could just put two pieces of wood in front of the wheels and drive on to them, then mosr jacks will fit.
Anthony

m12_nathan

5,138 posts

288 months

Sunday 12th February 2006
quotequote all
I got the one for demon tweeks for about £80 on Pauls recommendation when the standard one stopped fitting post nitrons. However it weighs something stupid like 35-40kg so it useless for taking to the track etc.

www.teamthink.co.uk/trolleyjack/product%20page.htm

Is supposed to be good but is expensive.

Cheers

joolski

813 posts

254 months

Sunday 12th February 2006
quotequote all
With my old exhaust I used to use a blow up thing which fitted on the exhaust pipe and filled a bag with gas.

Then I'd put the track stands under the car and remove the bag.

I got it from halfords, it was abut 40 quid.

Have'nt used it in a while, as I've not had reason to get under the car !

m12_nathan

5,138 posts

288 months

Sunday 12th February 2006
quotequote all
I saw those but figured as soon as the bag started having to lift the car the exhaust gas would take the easy way out and come out of the other pipe?

n8bby

47 posts

251 months

Sunday 12th February 2006
quotequote all
I bought a low profile trolley jack from my local costco total cost £64 with vat,that was only last week.

gizard

2,270 posts

312 months

Monday 13th February 2006
quotequote all
I have the Halfords one - you need to remove the rose if you just lift the car ever so slightly.

Guy

kinetic

348 posts

273 months

Monday 13th February 2006
quotequote all

Elise parts do the only genuinely low profile one I have found for anything like reasonable money. I think around £80. I beieve it wil drop to around 85-90mm. Ideal for a Noble or even my Elise racecar!

DanH

12,287 posts

289 months

Monday 13th February 2006
quotequote all
kinetic said:

Elise parts do the only genuinely low profile one I have found for anything like reasonable money. I think around £80. I beieve it wil drop to around 85-90mm. Ideal for a Noble or even my Elise racecar!



Good jack but they want quite a bit more for it :

www.eliseparts.com/shop/index.php?main_page=product_info&products_id=553

I have seen them for 100quid before all in, but not in the shops, more group buy etc.

kinetic

348 posts

273 months

Monday 13th February 2006
quotequote all
price has gone up somewhat!
Actually the one I got from them was a different model I assume they're not doing anymore.

AMG Merc

11,955 posts

282 months

Monday 13th February 2006
quotequote all
£110 each and they have 8...

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&

But this lower profile model looks like just the job for the Noble (scroll down and check out the phoo showing its profile compared to the above model). It's also cheaper at £92.00 too - the chap says he'll do a deal for multiple sales - sho who'll be first? ...

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&

This might not work?
http://cgi.ebay.co.uk/RACE-CAR-LONG-WHEEL-BASE-QUICK


>> Edited by AMG Merc on Monday 13th February 19:28

Captain Beaky

1,389 posts

313 months

Monday 13th February 2006
quotequote all
I don't know how low it needs to go for your car but I bought a trolley jack from Argos which just fits under the Cerbera (13cm nominal ground clearance). I sometimes need a slight lift from a little scissor jack to get started if I'm not parked on even ground.

It wasn't this one but was very similar.

ThatPhilBrettGuy

Original Poster:

11,810 posts

269 months

Monday 13th February 2006
quotequote all
Thanks for all the help people. I think Halfords and some wood is the answer!

DanH

12,287 posts

289 months

Monday 13th February 2006
quotequote all

I really want the US General one that elise parts have. Heard good reports on it.

Wood is ok, but the bits need to be really long to be completely safe. I've heard horror stories of shorter bits being picked up and gouged into the wheel arches when you pull onto them.

EpsomJames

790 posts

275 months

Tuesday 14th February 2006
quotequote all
I bought one of these a couple of years ago:
www.machinemart.co.uk/product.asp?p=020110270&r=2047&g=107

It's fine for occasional use and goes low enough for my Elise with sports suspension (jacking points are about 110mm off the ground). I don't know how that ride height compares to an M12 though?

HTH
James

robp

2,097 posts

270 months

Tuesday 14th February 2006
quotequote all
EpsomJames said:
I bought one of these a couple of years ago:
www.machinemart.co.uk/product.asp?

It's fine for occasional use and goes low enough for my Elise with sports suspension (jacking points are about 110mm off the ground). I don't know how that ride height compares to an M12 though?


Same as, James. Bought for Elise with Sports suspension and works a treat for the Noble. Can even get a piece of wood between the cup and the underside to avoid scratching the undertray.

obes

3,298 posts

273 months

Wednesday 15th February 2006
quotequote all