Staffs Shrops Meeting Sunday 5th March
Discussion
badredwedge said:
Any Wedgers going ?? Its at the Mill Worston / Little Bridgeford 11.30 ish I think. Very close to Junc 14 M6. I missed last month, which was the first meeting due to sh*t weather but I will be there this month. Come on boys fly the flag
Mmmmm not too far from me.
I need to try an oil change as I have very little oil pressure when oil gets hot. (Currently 10/40) If this sorts the oil pressure problem, I shall be there to fly the flag with you.

l33 said:
Mmmmm not too far from me.
I need to try an oil change as I have very little oil pressure when oil gets hot. (Currently 10/40) If this sorts the oil pressure problem, I shall be there to fly the flag with you.
Lee, dont want to turn this into another oil thread, but have you got a cooler fitted ????
l33 said:
No I haven't Darren. I have got the oil cooler but figured one more thing to go wrong?
Plenty of wedges run without. Is it really necessary?
I still have it and can refit if necessary.![]()
>> Edited by l33 on Saturday 25th February 21:59
I would fit it, that wild engine of yours is getting hot and it needs all the help it can get. I fitted one on my old standard 350 and it made a big difference. also buy a top quality oil ( search will give you a shed load of info ) after all, its a major moving part in your engine. Go on, spend £30 odd on a gallon of oil, you know you want to.
A decent oil is no concearn. I learnt my lesson when I was 17 with a metro 1.0. I did an oil change with oil from "poundland". Yes, £1 for a 5 litre plastic bottle of oil. My engine died about a week later
I will never skimp on oil now - I don't want to re-learn that lesson with the 4.5!!!
As for the oil cooler, I will have a look over the next week or so. If I can mount it somewhere to my wedge, then it will go on.
I have seen many posts about oil and what to use (one a couple of weeks ago looked good) so will research first.
Cheers,
Lee.
I will never skimp on oil now - I don't want to re-learn that lesson with the 4.5!!!
As for the oil cooler, I will have a look over the next week or so. If I can mount it somewhere to my wedge, then it will go on.
I have seen many posts about oil and what to use (one a couple of weeks ago looked good) so will research first.
Cheers,
Lee.
Gassing Station | Wedges | Top of Page | What's New | My Stuff





