Diff refurb advice please
Discussion
thanks Peter
I was thinking along the lines that refurbishing a diff i already had would be cheaper than getting another one, unless of course it's a standard ?Ford? unit that would be cheaper to buy new than from a TVR breakers ?
as per my original post, I'd appreciate any advice from anyone who's been down this route before
Mike
I was thinking along the lines that refurbishing a diff i already had would be cheaper than getting another one, unless of course it's a standard ?Ford? unit that would be cheaper to buy new than from a TVR breakers ?
as per my original post, I'd appreciate any advice from anyone who's been down this route before
Mike
competition transmissions - www.gearboxman.co.uk/
are the place the diff from my chim is going when i finally get around to getting it out...
they do alot of the diffs & gearboxes for the tuscan challenge motors..
G
are the place the diff from my chim is going when i finally get around to getting it out...
they do alot of the diffs & gearboxes for the tuscan challenge motors..
G
If the bearings are goosed you'd have heard it whining .. can you hear any noises?
I used to replace lots of side seals though, you can do that with the diff still in the car, used to be routine and TVR actually supplied the dealers with a tool to do it .. go ask your local dealer first before splashing out on a diff that might not be needed ..
I used to replace lots of side seals though, you can do that with the diff still in the car, used to be routine and TVR actually supplied the dealers with a tool to do it .. go ask your local dealer first before splashing out on a diff that might not be needed ..
Pro's and con's
Referb, you know the seals, bearings bushes and spaces are in good order but it requires the car to be off the road for a few weeks
Second hand, taken from a sub 25k miles write-off, done in a day and guaranteed for a month so you have time to decide if it's OK but there's no guarantee there after.
Both options cost the same for the basic 'diff', a few hundred. If the LSD needs replacing then the referb option becomes very expensive, more than £1k.
TVR don't do a direct replacement part, they changed manufacturer in 2001 as I understand and they no longer offer earlier parts. Their option was costed at £1.2k when I asked 18 months ago and needs chassis welding to modify the hangers.
Fitting not included in these prices.
>> Edited by tvrbob on Sunday 5th March 08:38
Referb, you know the seals, bearings bushes and spaces are in good order but it requires the car to be off the road for a few weeks
Second hand, taken from a sub 25k miles write-off, done in a day and guaranteed for a month so you have time to decide if it's OK but there's no guarantee there after.
Both options cost the same for the basic 'diff', a few hundred. If the LSD needs replacing then the referb option becomes very expensive, more than £1k.
TVR don't do a direct replacement part, they changed manufacturer in 2001 as I understand and they no longer offer earlier parts. Their option was costed at £1.2k when I asked 18 months ago and needs chassis welding to modify the hangers.
Fitting not included in these prices.
>> Edited by tvrbob on Sunday 5th March 08:38
trackcar said:
If the bearings are goosed you'd have heard it whining .. can you hear any noises?
lots of whining going on; have been quoted 4 hrs labour plus about £250 for the bearings refurn; seems reasonable, but will investigate the cost of buying a second hand one.
thanks for all the advice
Mike
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


