chassis slight rust?
chassis slight rust?
Author
Discussion

scott8570

Original Poster:

19 posts

247 months

Sunday 5th March 2006
quotequote all
Just had m.o.t done when up on ramps noted a bit of rust hear and there on chassis nothing serious yet but any ideas to protect chassis from this getting worse and cost.

Many Thanks........

Garethgtt

430 posts

263 months

Sunday 5th March 2006
quotequote all
If its only slight, then get it Waxoil coated underneath, you can either buy it yourself or take it to an indie and they`ll spray it on, underside will need to be washed and dried before coating.

Or you can go the whole hog and sand the rust off and paint with hammerite, but expect to be on your ass underneath the car for about 8 hours

budaholic

1,516 posts

264 months

Sunday 5th March 2006
quotequote all
8 hours??

mine took me 6 days........

but then I was fitting all new suspension at the same time......

Bud

kojak

4,547 posts

282 months

Sunday 5th March 2006
quotequote all
budaholic said:
8 hours??

mine took me 6 days........

but then I was fitting all new suspension at the same time......

Bud


8 hours...you might get one corner done.

touchingcloth

11,706 posts

268 months

Monday 6th March 2006
quotequote all
If the rust is already there then there is no point in just waxoiling over the top of it as far as I am aware. Waxoil seals but does not kill the rust, therefore it will continue to eat away underneath the coating. You want to get the rust sorted first and then use a protective layer. Alternatively some use POR15 which I believe does both jobs and with good results.

As for cost if paying someone then it's a case of how long is a piece of string. Its mostly labour costs but impossible to say how long it might take them.

jesfirth

1,743 posts

271 months

Tuesday 7th March 2006
quotequote all
if you have a liitle rust at the rear there is likely to be rather more at the front. Have a look at my thread "what a lovely chassis" from 3 months ago which gives you detauils of how I treated mine.

scott8570

Original Poster:

19 posts

247 months

Thursday 9th March 2006
quotequote all
Thanks for advise more involved than first thought

Wiggyfella

131 posts

251 months

Friday 10th March 2006
quotequote all
Likewise, when I saw the underside of mine (while it was on an AA low loader sadly), I noticed some rust on the chassis outriggers.

While it's in with them, the guys at David Gerald TVR have helped to clean this off, and have applied Waxoyl to them for me (this is normal practice for them, so thumbs up to David Gerald for that).

Cheers.