350i Cooling Fan Motors
350i Cooling Fan Motors
Author
Discussion

sadbloke

Original Poster:

436 posts

250 months

Thursday 16th March 2006
quotequote all
Anyone know where to get direct replacement fan motors from? only one of them gone, made in Japan labelled SANDEN.

>> Edited by sadbloke on Friday 17th March 00:45

l33

3,469 posts

253 months

Thursday 16th March 2006
quotequote all
I flogged a fan motor on fleabay a couple of weeks ago. Pistolar won it and now has it. Don't know if he needs it? Might be worth a PM?

sadbloke

Original Poster:

436 posts

250 months

Friday 17th March 2006
quotequote all
Are there any known cars that have similar size motors fitted and/or does anyone know the current the original ones use?

digga951

490 posts

304 months

Friday 17th March 2006
quotequote all
A friend has a 1985 350i with twin cooling fans. When his broke, he discovered that a Rover 800 series was the exact same part. I have no idea what the part numbers were or if it varied from year to year, but it may be a starting point if you discover yourself down the dreakers over the weekend. There have been a few different types of cooling fan in the 350i's (twin and single fans too), but I would start with a Rover 827 if I was looking.

I heard that a Mondeo fan unit can be made to fit too from someone on here...

deetes

413 posts

262 months

Saturday 18th March 2006
quotequote all
My fans came off a diesel FSO van. Not pretty but they work. Also made up a fan overide switch and indicator light at the same time.

gsx600

2,740 posts

277 months

Saturday 18th March 2006
quotequote all
I have a spare single fan unit still in the cowling, that I took off my old 350. Worked well untill it stopped Bought a new one and fitted it, still did not work.
In the ned it was the connector plug knackered so replaced that and all worked but could not be bothered to refit old unit by then
So it's available and working

sadbloke

Original Poster:

436 posts

250 months

Saturday 18th March 2006
quotequote all
Went round one of the largest breakers on lincs this afternoon. No motors the right size on anything. I am trying to get the identical ones just because I managed to remove the fans from the gap between the nose and open bonnet, If I make any mods to fit other types I am going to have to remove the whole fan housing from the underside? what a hassle?

digga951

490 posts

304 months

Saturday 18th March 2006
quotequote all
Can you post a picture of it so we know which type it is? If its a single fan unit, I know of 2 sorts. One bolts onto a moulded, fibreglass shroud that the rad fits into. The fan surround is also sometimes orange and kinda flared, and the fan has about 4 blades. My car uses this type.

The other type I'm aware of is held in front of the rad by 2 flat pieces of metal and a couple of metal rods. This fan has about 8 smaller blades I think, but it doesn't fit into a shroud. I have one of these laying up the top of my garden!

I know its the motor you need, but they are probably different for each type.

sadbloke

Original Poster:

436 posts

250 months

Saturday 18th March 2006
quotequote all
I cannot post a pic as my ISP does not give me any webspace??? If you could use contact member at pistonheads I will reply directly with a pic by email?

digga951

490 posts

304 months

Saturday 18th March 2006
quotequote all
Just mailed you