The machinery porn thread!
Discussion
Come on, if you're a bloke you'll know where I'm coming from. In't machinery great!
Found this on ebay, it's bloody gorgeous...
http://cgi.ebay.co.uk/ws/eBayISAPI.dl
If only I'd won a few bob on't lotto, Grommit...
So, anyone else a fan of cast iron and ACME leadscrews...?
Found this on ebay, it's bloody gorgeous...
http://cgi.ebay.co.uk/ws/eBayISAPI.dl
If only I'd won a few bob on't lotto, Grommit...
So, anyone else a fan of cast iron and ACME leadscrews...?
wedg1e said:
So, anyone else a fan of cast iron and ACME leadscrews...?
That sounds like a cry for help, I think you'd better get over to this place - http://cnczone.com/forums/forumdispla
wedg1e said:
Come on, if you're a bloke you'll know where I'm coming from. In't machinery great!
Found this on ebay, it's bloody gorgeous...
http://cgi.ebay.co.uk/ws/eBayISAPI.dl
If only I'd won a few bob on't lotto, Grommit...
So, anyone else a fan of cast iron and ACME leadscrews...?
I love the little 'steering wheel' on it.

_VTEC_ said:
wedg1e said:
Come on, if you're a bloke you'll know where I'm coming from. In't machinery great!
Found this on ebay, it's bloody gorgeous...
http://cgi.ebay.co.uk/ws/eBayISAPI.dl
If only I'd won a few bob on't lotto, Grommit...
So, anyone else a fan of cast iron and ACME leadscrews...?
I love the little 'steering wheel' on it.
Yeah, that's the 4-spoke: later models had a carbon-fibre 3-spoke deep-dish with central...er... ummm...

FourWheelDrift said:
wedg1e said:
So, anyone else a fan of cast iron and ACME leadscrews...?
That sounds like a cry for help, I think you'd better get over to this place - http://cnczone.com/forums/forumdispla
No, dammit, CNC is for computer geeks, not mucky-fingered techies. Yer CNC type wouldn't know how to compensate for backlash in a feedscrew or an eccentric chuck, now would they 
If you're going to get a machine that size, you're much better off with a Colchester Chipmaster. You will pay a bit more, but for the size of machine it's much stronger, has induction hardened slides, proper coolant handling, a really strong and flexible screwcutting capability and is otherwise a far superior machine.
The only downside with the chipmaster is that it's drive system is infinitely variable for speed, and it does sometmes go wrong.
The thing though really is that if you think you're going to be doing anything with stainless and carbide tooling, the boxford just won't be up to it.
Further edited to add, if you're going to be using your lathe for milling, spiralling (fast pitch helical milling) gear hobbing, you might be better of with something a bit earlier, but similarly beefy. A 12" Atlas would be the sort of thing to go for.
>> Edited by dilbert on Sunday 19th March 15:42
>> Edited by dilbert on Sunday 19th March 15:45
The only downside with the chipmaster is that it's drive system is infinitely variable for speed, and it does sometmes go wrong.
The thing though really is that if you think you're going to be doing anything with stainless and carbide tooling, the boxford just won't be up to it.
Further edited to add, if you're going to be using your lathe for milling, spiralling (fast pitch helical milling) gear hobbing, you might be better of with something a bit earlier, but similarly beefy. A 12" Atlas would be the sort of thing to go for.
>> Edited by dilbert on Sunday 19th March 15:42
>> Edited by dilbert on Sunday 19th March 15:45
My Dad's been a jammie git recently and managed to get a Myford super 7 with full gearbox and a small van load of "bits" to go with it, needed a lick of paint but other than that had seen virtually zero hard work in it's life. Beautiful piece of machinary, and the get paid 1/4 what I've seen them go for in tatty condition.
jagdpanther said:
Is this limited to workshop machinery??
If not, cast your eyes on this piece of "Machinery"
You've made a basic mistake here. You've confused a toy with a tractor.
http://tinyurl.com/pt9cd
And the Church might not like them but this floats my boat.
www.cat.com/cda/layout?m=37840&x=7&location=drop
Check out the D9, D10 and D11.
>> Edited by olf on Sunday 19th March 17:09
www.cat.com/cda/layout?m=37840&x=7&location=drop
Check out the D9, D10 and D11.
>> Edited by olf on Sunday 19th March 17:09
olf said:
jagdpanther said:
Is this limited to workshop machinery??
If not, cast your eyes on this piece of "Machinery"
You've made a basic mistake here. You've confused a toy with a tractor.
http://tinyurl.com/pt9cd
Yeah but finding a decent picture of a fasttrac isnt easy

No that's fine: I had all sorts of machinery in mind. In fact I'm surprised there are no pics of Deltics and that bloody huge Japanese diesel engine yet...
Myford 7/7B/Super 7 etc.: nice but grossly overpriced nearly all the time. And since about 1980 I gather they've been cast in China anyway...
As for the Boxford, I realise it's a shade small for some stuff, but I only have limited space; it's got to be better than the 1920's-design Mellor I have now; and anyway I have a mate with a proper machine shop if I get stuck
Oh and anyway I'm a crap machinist......
Myford 7/7B/Super 7 etc.: nice but grossly overpriced nearly all the time. And since about 1980 I gather they've been cast in China anyway...
As for the Boxford, I realise it's a shade small for some stuff, but I only have limited space; it's got to be better than the 1920's-design Mellor I have now; and anyway I have a mate with a proper machine shop if I get stuck
Oh and anyway I'm a crap machinist......

Gassing Station | The Pie & Piston Archive | Top of Page | What's New | My Stuff






