Discussion
My M reg Chim just had a terminal block (chocolate block I think they are called) - I think the previous owner had put an aftermarket stereo in and had cut off the old connector. I bought an ISO connector and wired it into the therminal block so it is now just a case of plugging the stereo in and out when required.
It's really simple to remove the stereo, just pull it out and have a quick look, if its not an ISO connector, you can wire one in by matching the wiring from your current stereo to the block. You can probably download a manual from the stereo manufacturers site that tells you what all the wires are and what they do.
Yep mine was an ISO block on a 2000 model, a very easy change.
the speakers were more of a problem as they are 6 inch and they are very hard to find.
Maplin do sone very cheap, which although not the best are better than the standard fit.
[url]www.maplin.co.uk/Module.aspx?ModuleNo=37986&C=Froogle&U=37986&T=32084[/url]
(just check your size first)
Alan
the speakers were more of a problem as they are 6 inch and they are very hard to find.
Maplin do sone very cheap, which although not the best are better than the standard fit.
[url]www.maplin.co.uk/Module.aspx?ModuleNo=37986&C=Froogle&U=37986&T=32084[/url]
(just check your size first)
Alan
well got some sony xplod
model XS-GT5035 5 1/4 inch and they fit amazing
really snug - perfect fit
look here
www.teessidelads.com/cpg132/displayimage.php?album=32&pos=26
model XS-GT5035 5 1/4 inch and they fit amazing
really snug - perfect fit
look here
www.teessidelads.com/cpg132/displayimage.php?album=32&pos=26
Gassing Station | Chimaera | Top of Page | What's New | My Stuff