Nearly Fifty-year old HiFi equipment!
Discussion
Following on from the Steam Trains thread, I have been doing my own bit of harking back to bygone eras. I realise that for every 30 steam train anoraks there are probably only one or two hifi anoraks so this might not be as interesting...
Last weekend I bought a complete set of Quad valve separates that had spent the last 30 or so years in somebody's loft - 2 monoblock power amps, preamp and FM tuner. These little beauties (library pic, not actual units)......
The sound .....
Like a comfy old pair of slippers. Such an elegant design, and it all works so well - the mains transformers are absolutely silent, no hum and very little hiss. The power amp was a design that Mr Peter Walker
came up with back in 1953! They were so good that they remained in production until 1970, and Quad are now remanufacturing them, design unchanged, as the Quad II Classic.
My examples date from about 1959, and I will probably do a few tests this weekend - no doubt some components have drifted well out of tolerance and need replacing. From the sound they make, if anything was wrong you would not be able to tell.
They came in the original boxes ('British Railways' consignment sticker) with the original instructions as well - wonderful stuff, I think it was written by Mr Cholmondeley-Warner himself. "When installing this amplifier it should be borne in mind that the standard of performance of the complete equipment is limited by that of the poorest component part. Thus the gramophone motor and pickup, loudspeaker etc., should all receive careful consideration if full advantage is to be taken of the capabilities of the amplifier". Feels a bit sacreligious plugging a CD player into it. I dare not connect the iPod - it just wouldn't be right, somehow.
The instruction book also came with a complete circuit diagram, a layout photograph of the innards cross-referencing all the different components, and a complete specification of all the parts, enabling anybody competant with a soldering iron to carry out repairs.
It all makes today's disposable cheap short-lived Chinese-built electronics look a bit silly and wasteful, really. I'll stop now before this turns into a rant.
Last weekend I bought a complete set of Quad valve separates that had spent the last 30 or so years in somebody's loft - 2 monoblock power amps, preamp and FM tuner. These little beauties (library pic, not actual units)......
The sound .....
Like a comfy old pair of slippers. Such an elegant design, and it all works so well - the mains transformers are absolutely silent, no hum and very little hiss. The power amp was a design that Mr Peter Walker
came up with back in 1953! They were so good that they remained in production until 1970, and Quad are now remanufacturing them, design unchanged, as the Quad II Classic. My examples date from about 1959, and I will probably do a few tests this weekend - no doubt some components have drifted well out of tolerance and need replacing. From the sound they make, if anything was wrong you would not be able to tell.
They came in the original boxes ('British Railways' consignment sticker) with the original instructions as well - wonderful stuff, I think it was written by Mr Cholmondeley-Warner himself. "When installing this amplifier it should be borne in mind that the standard of performance of the complete equipment is limited by that of the poorest component part. Thus the gramophone motor and pickup, loudspeaker etc., should all receive careful consideration if full advantage is to be taken of the capabilities of the amplifier". Feels a bit sacreligious plugging a CD player into it. I dare not connect the iPod - it just wouldn't be right, somehow.
The instruction book also came with a complete circuit diagram, a layout photograph of the innards cross-referencing all the different components, and a complete specification of all the parts, enabling anybody competant with a soldering iron to carry out repairs.
It all makes today's disposable cheap short-lived Chinese-built electronics look a bit silly and wasteful, really. I'll stop now before this turns into a rant.
They are great, I have loads of quad gear,303s,44 pre-amp,34 pre-amp,Fm4 tuner and a pair of the quad II power amps with chrome covers on the transformers and you can still get any of them serviced for a fixed price by quad in Huntingdon!!
Try getting your jap amps of 6 months or older repaired.
With quality CD and decent cabling combined with either quad electrostatics or other good speakers they are unbeatable at any price.
And they glow! what more could you wish for.
Try getting your jap amps of 6 months or older repaired.
With quality CD and decent cabling combined with either quad electrostatics or other good speakers they are unbeatable at any price.
And they glow! what more could you wish for.
I'd recommend changing the caps on them, the originals (although I doubt the caps are original) will have long dried out. Its probably worth checking the insulation on the internal wiring, as much of it may be crumbly to the touch.
At the very least, do a PAT test on them all
Oh, and get yourself some ESL63's!
At the very least, do a PAT test on them all
Oh, and get yourself some ESL63's!

angrys3owner said:
good work, I hope you didn't con some poor old biddy out of them and you paid a fair price!
Paid £480 - they didn't have the original GEC output valves which was a bit of a shame as they are like gold dust - would have been worth a good £200 extra with those.
The guy had tried to sell them on eBay with no success (prob due to lack of a feedback record) so decided to put out the feelers to see if anyone knew of a reseller that might be interested. I got a phonecall from a friend about three places down the grapevine, my first suggestion was to try the HiFi Emporium in Suffolk, then I thought to myself, I've been vaguely considering getting a set of these for some time, they sound like good examples, why not?
Nice kit!
I have a pair of Quad 405 modules wih home-brew PSUs and the safety circuitry bypassed
Cholmondeley-Warner would p1ss his pants.
Alas my days of living in a Victorian pile with real walls are passed and I can't remember the last time I opened them up (to use a motoring simile).
The rest of my sysem, while not 50, is getting there: Armstrong 625 from '75, Bowers & Wilkins DM4s (1974) and a Rega Planar 3 that probably got on down and boogied in the 80's... Marantz CD273 is positively brand new ...well it was in '87
My mate Jez of Arkless Electronics (and formerly NEAT and Musical Fidelity amongst others) does upgrades to valve gear (rewire, new matched components etc...)
I have a pair of Quad 405 modules wih home-brew PSUs and the safety circuitry bypassed
Cholmondeley-Warner would p1ss his pants. Alas my days of living in a Victorian pile with real walls are passed and I can't remember the last time I opened them up (to use a motoring simile).
The rest of my sysem, while not 50, is getting there: Armstrong 625 from '75, Bowers & Wilkins DM4s (1974) and a Rega Planar 3 that probably got on down and boogied in the 80's... Marantz CD273 is positively brand new ...well it was in '87
My mate Jez of Arkless Electronics (and formerly NEAT and Musical Fidelity amongst others) does upgrades to valve gear (rewire, new matched components etc...)
I still have a fully working RCA AR88D short wave reciever from WW2 PBF!.....American made, used as base recievers and on board ships during the war, they were very reliable and of good quality. The bandwidth is variable and AM, upper and lower sideband tranmissions, CW are recievable. Full bandwidth on Medium wave to a good speaker is still impressive!
...
It's recentley started to show some faults........will have to spend some time with it very soon to keep it in order....capacitor failure I think!..
... It's recentley started to show some faults........will have to spend some time with it very soon to keep it in order....capacitor failure I think!..
Gassing Station | The Pie & Piston Archive | Top of Page | What's New | My Stuff








