seat belt light-help please
seat belt light-help please
Author
Discussion

cabbron

Original Poster:

416 posts

248 months

Thursday 6th April 2006
quotequote all
hi guys,wondering if anyone can estol their wisdom,my s1 seatbelt light flases on and off in the corners.bit like a traction control light-jeepers what a thought.can anyone help.cheers in advance.

purpleperil

1,226 posts

315 months

Thursday 6th April 2006
quotequote all
Slight hijack - sorry - Mine doesn't seem to work at all?! I don't know if it should (MY06 111R). Only appears to come on when I first turn on ignition then extinguishes and doesn't come on whether seat belt fitted or not when driving. There doesn't seem to be an electrical connection to the buckle but maybe I'm not looking hard enough?

S works

10,166 posts

281 months

Thursday 6th April 2006
quotequote all
There is a wire that runs from the drivers buckle under the seat. It can get caught and fray. Have a good look, probably frayed and the connection is going on and off as it wiggles around.

speedyellow

2,533 posts

258 months

Thursday 6th April 2006
quotequote all
Purple, if you have a sports pack or performance pack (lost track of what they call it now) with the harness bar fitted then the light does go out very quickly after the car is started as you might be wearing the harness.

purpleperil

1,226 posts

315 months

Thursday 6th April 2006
quotequote all
speedyellow said:
Purple, if you have a sports pack or performance pack (


I wish! No - only touring pack - looks like its another thing to add to the snags list then?

shangani

3,069 posts

268 months

Friday 7th April 2006
quotequote all
S2's do not have a wire to the seatbelt - just a light that flashes a few times and goes off. The S1 - as in the original question - does have a wire and this must have a dodgy connection on the circuit.

Sublime

142 posts

250 months

Friday 7th April 2006
quotequote all
Mine decided one day to stop working, turned out that the wire is joined under the seat by a bullet connector that had worked itself loose, probably caused by the seat being moved everytime I got in and out. If you put the drivers seat fully forward you can get to it from the passenger side and take a look. Just needed to put mine back together and tape it up to stop it happening again.

TonyHetherington

32,091 posts

281 months

Friday 7th April 2006
quotequote all
shangani said:
S2's do not have a wire to the seatbelt - just a light that flashes a few times and goes off. The S1 - as in the original question - does have a wire and this must have a dodgy connection on the circuit.


Yup - what he said. My MY04 111S doesn't have a connection from the seat or seat belt to the car. Simply, you turn the engine on and it flashes a few times; nothing too complicated about it!

cabbron

Original Poster:

416 posts

248 months

Friday 7th April 2006
quotequote all
thanks for the advice,job for tomorrow look at that connection/wire.