Geometry settings

[n8bby]

Does any body now the geometry settings for the front wheels on a 2.5 please,just fit new tyres and would lke to check them out,thanks Ian.

[m12_nathan]

Any dealer should be able to tell you what the tracking should be set at, the rest of the geo is fixed from memory.

[obes]

What number car is it mate ?

[m12_nathan]

I forgot I had this sheet - hopefully this is useful to you guys:

www.justgofaster.com/gallery/gallery/nathan/noble/NobleData.doc

[adrian w]

M400
M400 rack height is the same as a late 3R (107mm)
Front – 1mm toe out Rear – 2-3mm toe in

Tyre pressures – Front 18 psi, Rear 26 psi

This cant be right

[m12_nathan]

Dunno - I promise I haven't editted it!

[C&C]

Tyre pressures

On an M400, I believe front is 20PSI, Rears 30PSI

Edited to say - D'Oh - just realised original question was about a 2.5
Must pay more attention....

>> Edited by C&C on Wednesday 12th April 16:59

[V6GTO]

The pressures are different because they use different tyes, no?

Martin.

[joust]

M400 (Corsa) pressures are higher than 2.5-3-3R (SO3s)

J

Edited as I was having a blond moment - M400s are indeed higher as pointed out by C&C.

>> Edited by joust on Wednesday 12th April 18:34

[C&C]

Simon gave a pretty definitive answer in this thread on tyre pressures:

www.pistonheads.com/gassing/topic.asp?t=195564&f=26&h=0&hw=20+psi+m400

[m12_nathan]

I recieved that document by email from a technical person at the factory 16-02-05 so can assume it was current at the time.