brake fluid leak?
brake fluid leak?
Author
Discussion

g-boy

Original Poster:

236 posts

246 months

Wednesday 12th April 2006
quotequote all
have dmapness in driver footwell.

does brake fluid smell a bit like screen wash? it definitely isn't water anyway.

any other suggestions? could it actually be the screen wash reservoir leaking?

also, had leaking in passenger footwell that has mostly dried up since i got a car cover, does this suggest it was just a rain leak previously?

dnb

3,330 posts

271 months

Wednesday 12th April 2006
quotequote all
Driver's side is probably clutch fluid leaking. Mine did that shortly before the seals in the clutch master cylinder gave up and I found the clutch stopped working...

It's £10 for the seal kit if you do it yourself.
Don't worry - it's not expensive, and it's not a particularly difficult job.

GreenV8S

31,017 posts

313 months

Wednesday 12th April 2006
quotequote all
If the fluid is hydraulic fluid then be aware that it is extremely corrosive as well as being flammable - if you get it on your shoes and then tread into the house you are in danger of finding footprint shaped holes in the carpet in a months time. It's nasty stuff and you don't want to give it any chance to get on you or your clothes.

tvr_nut

390 posts

303 months

Wednesday 12th April 2006
quotequote all
dnb said:
Driver's side is probably clutch fluid leaking. Mine did that shortly before the seals in the clutch master cylinder gave up and I found the clutch stopped working...

It's £10 for the seal kit if you do it yourself.
Don't worry - it's not expensive, and it's not a particularly difficult job.


I thought it was a real bar-steward to get to? Headfirst down the footwell even less of a joke with your head in a puddle of spilled brake fluid (bald spot - NAH, just where me hair got corroded away!).

Did the job on my old Wedge which was easy. That lost the entire reservoir contents down the pedal over about a week. The floor mat survived undamaged, once washed and the smell had worn off.

dnb

3,330 posts

271 months

Wednesday 12th April 2006
quotequote all
In the grand scheme of things, it's not difficult - compared to say replacing the radiator, fitting a full set of polybushes, rewiring the car or fitting an aftermarket ECU...

You can drain the cylinder and take it out of the car so you don't have to grovel in the footwell.