Cooling fans not working - ideas?
Discussion
So far I have checked connections near the fans. Removed and checked fuse. Taken front cover of and disconnected the temp sensor. I had read in a search that once this is removed the fans should start. They didnt. Anything else im missing??? Im thinking the actual fans might be knackered - but both not working?
Any ideas / experience!
Any ideas / experience!
crazycats said:
When you disconnect the plug on the temp sensor, the ECU switches both fans on, and illuminates the MIL light.
Crazycats just take for instance you're in a traffic jam, say Le mans sweating it out very hot, to keep car cool can you just pull this off as a quick fix, or is it advisable not too?
>> Edited by dean_ratpac on Monday 24th April 16:57
dean_ratpac said:
crazycats said:
When you disconnect the plug on the temp sensor, the ECU switches both fans on, and illuminates the MIL light.
Crazycats just take for instance you're in a traffic jam, say Le mans sweating it out very hot, to keep car cool can you just pull this off as a quick fix, or is it advisable not too?
>> Edited by dean_ratpac on Monday 24th April 16:57
Hi Dean,
Yep as a quick fix, don't see a problem, however I wouldn't want to leave it too long....probably better to wire in a manual switch somewhere.
Joo does a modded chip which cycles one fan in at much lower temps, roughly themostat opening temps IIRC. That's probably the way forward. Never understood why the fan operating temps are so high, and so close together.

Gassing Station | Cerbera | Top of Page | What's New | My Stuff


