Drip tray fixing

[worty]

Picking mine up next week . Has anyone fixed theirs yet ? If so any tips or ideally ( as I'm a bit ham fisted ) a photo instruction sheet would be good
Thanks
worty

[kevgee]

yes m8 did mine about 3 weeks ago. very easy i have pics but dont know how to upload onto here. you need to mark where the wipers are with tape then take them off along with any tubeing for your screen wash system place the tray over drill a couple of holes 1 either side just to hold it in place and then refit the wipers. total time 30 mins. i also fitted the stone guards as well extra 10 mins.if you tell me how to upload i can get the pics on here as well thanks
kev

>> Edited by kevgee on Thursday 27th April 13:19

[worty]

Kev
Thanks for that. I think you need to have the pics hosted on a website first then you just link them using the formatting codes which are available by clicking on the left hand side of the box in which you type your message.
Paul

[alex s]

Worty, I should have some photos and fitting guide up sometime over the weekend.
Very easy to do as Kev metioned.

[worty]

alex s said:

Worty, I should have some photos and fitting guide up sometime over the weekend. Very easy to do as Kev metioned.

Cheers mate
I'm picking up the two drip trays next week from Matt. You should have had my money straight into you account. I emailed Ian and asked him to contact you direct to sort his payment. Hopefully that has now beeen sorted

Paul

[Mr Noble]

Kev if you mail the pics to me now, i'll stick them up.

[e-mail]

Can you make them smaller first. Resize them to 750 pixels wide (or tall whatever longest side)

Greg

[alex s]

Mr Noble said:

Kev if you mail the pics to me now, i'll stick them up. [e-mail] Can you make them smaller first. Resize them to 750 pixels wide (or tall whatever longest side) Greg

Greg, any ideas when you are collecting you three??

[Mr Noble]

Will be heading to London on Tuesday or Wednesday.

Unless you want to meet up on Sat for lunch or unless you're going up to pistonfest on Sunday?

G

>> Edited by Mr Noble on Friday 28th April 09:12

[lucozade]

alex s said:

Greg, any ideas when you are collecting you three??

Alexs, can you PM me your details so I can send payment for mine, ta.

[kevgee]

Mr Noble said:

Kev if you mail the pics to me now, i'll stick them up. [e-mail] Can you make them smaller first. Resize them to 750 pixels wide (or tall whatever longest side) Greg

give me a couple of mins to resize them e mail
kev

[kevgee]

kevgee said:

Mr Noble said: Kev if you mail the pics to me now, i'll stick them up. [e-mail] Can you make them smaller first. Resize them to 750 pixels wide (or tall whatever longest side) Greg give me a couple of mins to resize them e mail kev

ive sent them so you should get them soon
kev

[kevgee]

alex s
its the front passenger side im missing on the stone guard. when did you send it out to me

kev

[Mr Noble]

Here are Keegave's pics of the stone guards and drip tray. I left one pic out cause it was so bad it would have been embarrasing for you Kevin!

Greg

[worty]

Kev,Greg
Thanks . At least I'll now know what it should look like.
Unless it involves coat hangers ,toilet rolls and sticky back plastic I'm usually stuffed.
( if you need that explaining your far to young to be up at this time of night)
worty

[mr2turbo300]

Anybody thought about "gluing" the stone guards on ?

I guess you would have to be careful what you used, just a bit worried about the screw holes causing some kind of fracture point at some point in the future on expensive clams.
Any Views ?
Rob.



>> Edited by mr2turbo300 on Friday 28th April 06:56

[alex s]

I have used double sided carpet tape to stick mine on, seems to work ok, so far....

[V6GTO]

At the very least spray the screw heads black.

Martin.

[kevgee]

they were left like that so you could see what id done.
kev

[Ash M400]

I do mine tomorrow. Will let you know.

[robp]

Alex - drip tray looks v tidy. Are you going to do a second order for these??
Cheers
Rob