Exhaust hanger

[hut49]

The triangular-ish rubber mount beneath the boot on which the exhaust is mounted, is knackered. Over rough surfaces it sounds like there's a load of wooden planks clattering about in the boot (and, yes I did check that 'er indoors handn't put any in there ).

On inspection the exhaust is bumping off the underside of the boot where the twin pipe pass. Doesn't seem to be any resistance in the rubber anymore.

Is this a special TVR part or should I drop into the local exhaust center? Thanks

Hutch

[heliox]

Just replaced mine at a cost of £4 + vat from Kerridges.

heliox