Better Washer arm - top tip of the week!

[mikeb]

Recently bought a Citroen CX washer hoop (the plastic hoop that fits to the wiper arm) off ebay for a few quid.

Its the same one that they fit to the Griffs etc, had to change the clips around as the wiper on the wedge is the other way around, but it then fitted perfectly.

Got a plastic tube Y adapter from the local autofactors for a few pence and plumbed it in tandem with the main water windscreen washer nozzle.

It all works great and puts water right where you want it on the screen, much improved.

MikeyB

Gotta watch as along with the alloy roof stays I am ever so slowly turning the Wedge into a Griff! I 'll be turning up to the Griff growl next........... ;-)

>> Edited by mikeb on Friday 12th May 00:00

[chassis 33]

I did the same on my Tasmin using a Pug 405 washer arm. Bloody effective!

Regards
Iain

[Gandalf]

mikeb said:

Gotta watch as along with the alloy roof stays I am ever so slowly turning the Wedge into a Griff! I 'll be turning up to the Griff growl next........... ;-) >> Edited by mikeb on Friday 12th May 00:00

Hhhmmmmmmmmm Turn up at a Griff Growl....................................




I wonder what would that be like?

[Wedgetarian]

Would it be a Griffmin or a Tasith?

[stever]

Gandalf said:

mikeb said: Gotta watch as along with the alloy roof stays I am ever so slowly turning the Wedge into a Griff! I 'll be turning up to the Griff growl next........... ;-) >> Edited by mikeb on Friday 12th May 00:00 Hhhmmmmmmmmm Turn up at a Griff Growl.................................... I wonder what would that be like?

Been there, done that, it was good. However I went two years ago when they held it at Gaydon, what a dull venue, but I see they have followed our lead now.

[deetes]

Gandalf said:

[quote=mikeb] Gotta watch as along with the alloy roof stays I am ever so slowly turning the Wedge into a Griff! I 'll be turning up to the Griff growl next........... ;-) >> Edited by mikeb on Friday 12th May 00:00

Did the Griff washer loop deal about 4years ago. I think I got it through the TVRCC.

Do the Griff Alloy struts fit straight on?

Should have quoted mikeb, but there you go

>> Edited by deetes on Friday 12th May 11:53

[dickymint]

deetes said:

Do the Griff Alloy struts fit straight on?

More or less, but Mikey will elaborate........might even tell you to go for a larger rear screen panel to show em off better

[mikeb]

Err'm well yes I might have muttered something like that in the ear of the guy making the new roof well the bastewards cost me enough from the breakers, gotta show 'em off!

The fitted just but I had to get the hole enlongated slightly as they were slightly longer than the standard black jobbies.

Anyhow Gandalf, any joy with the RAF roundals, bullet holes and the Audi stickers with crosses through 'em for the doors?

MikeyB