Peugeot 406 HDI 110 chipping advice

[YamR1,V64motion]

hi, not posted on this part of the forum before just needed to know if anyone has a 406 HDI 110 or indeed any HDI 110 and can let me know how big and noticable the power/torque gains are and the best place to get it done.

[Rs Rosco]

Worked on a superchips equppied one last year, made a hell of a diffrence, went thru a few clutches though...

Ross

[Mr Whippy]

Celtic tuning or Derv Doctor both do custom remaps.

They just up the boost and alter the fuelling to take up the slack, and numberous other tweaks, and you end up with around 150bhp and 250lbft...

Well worth the £300+vat that seems to be the going rate.


I'm planning on remapping my 306Hdi with one of the above, but as standard it has no intercooler, so gains are limited. If your happy to would you care to take some pictures of the intercooler at all? I'm tempted to try fit a Hdi110 cooler, or at least the piping or something to get me half way there

Cheers

Dave

[YamR1,V64motion]

Mr Whippy said:

Celtic tuning or Derv Doctor both do custom remaps. They just up the boost and alter the fuelling to take up the slack, and numberous other tweaks, and you end up with around 150bhp and 250lbft... Well worth the £300+vat that seems to be the going rate. I'm planning on remapping my 306Hdi with one of the above, but as standard it has no intercooler, so gains are limited. If your happy to would you care to take some pictures of the intercooler at all? I'm tempted to try fit a Hdi110 cooler, or at least the piping or something to get me half way there Cheers Dave

sure no problem, just about to head out on the bike for the afternoon but will try and take some when i get in.

[YamR1,V64motion]

had a quick look under the bonnet today and it looks a bit of a nightmare, i couldnt visably see the turbo and couldnt follow down to the intercooler, if you can let me know where abouts it is exactly mr whippy i will gladly take some pics.

[Mr Whippy]

I think the intercooler sits at the front of the engine, next to the radiator.

No worries really if you can't, I'm looking out for one in a scrapper so I can pull things off and see what goes where

Just seen a 306 Hdi in a breakers today and had a feel around the back and a good look as the engine was hanging off just one mount. I rekon I may get one of those PWR chargecoolers in there just nicely, then it's all hidden away and stock looking and minimum hassle, then it's just routing for the water>air rad which is easy peasy

Cheers for the look anyway.

Dave