PCCB pictures...!
Discussion
The pictures and comments were on this thread....... www.pistonheads.co.uk/gassing/topic.asp?p=1&f=&t=249327&h=0
I suggest you give R1 JON a shout and see if he can dig them out for you .
I suggest you give R1 JON a shout and see if he can dig them out for you .
Got your mail, don't worry too much about the noise unless its getting really grinding however, the rust you refer to i can only guess is perhaps some copper or other metal coming off the pads.
Check the discs by running your finger across the face (when cold !! ) ideally they should feel like a table top very smooth. Check the back fac of the front disks especially
If it starts to feel like sandpaper either at the outside or inside then they are starting to go.
I did not bother with OPC as i had tracked it and i did not want PCCB back on my car ( i had total brake failure at Bedford with no prior warning, it looked like i had knocked a cooling duct off on one of the kerbs and the brakes disappeared.
Check the discs by running your finger across the face (when cold !! ) ideally they should feel like a table top very smooth. Check the back fac of the front disks especially
If it starts to feel like sandpaper either at the outside or inside then they are starting to go.
I did not bother with OPC as i had tracked it and i did not want PCCB back on my car ( i had total brake failure at Bedford with no prior warning, it looked like i had knocked a cooling duct off on one of the kerbs and the brakes disappeared.
Gassing Station | Porsche General | Top of Page | What's New | My Stuff


