Driving light/front fog protectors
Driving light/front fog protectors
Author
Discussion

andy o

Original Poster:

41 posts

244 months

Thursday 25th May 2006
quotequote all
I want to place protectors on bottom driving lights and I was thinking of perspex disks. As my acuracy with a jigsaw is somewhat questionable can anyone let me know if they can be bought off shelf?

Cheers

RichardD

3,608 posts

274 months

Thursday 25th May 2006
quotequote all

llanelli-rob

533 posts

253 months

Thursday 25th May 2006
quotequote all
andy o said:
I want to place protectors on bottom driving lights and I was thinking of perspex disks. As my acuracy with a jigsaw is somewhat questionable can anyone let me know if they can be bought off shelf?

Cheers


Just fitted these to mine,2 minute job and you can't even notice them

andy o

Original Poster:

41 posts

244 months

Thursday 25th May 2006
quotequote all
Cheers will give them a go

torquemada

621 posts

302 months

Thursday 25th May 2006
quotequote all
I found a better option are the protectors sold by Steve Dunster (S.D.Tools Ltd). These are moulded to shape and held in place by the driving light rubber 'gaiters'. Fiddly to fit, but once in place you wouldn't know they were there. In my experience the 'carbo discs' are quite obtrusive and difficult to secure effectively.
I bought mine about 3 years ago (£25/pair), so not sure if still available. Try emailing Steve at steve@sdtools.freeserve.co.uk

Hope this helps.

cln1

657 posts

254 months

Thursday 25th May 2006
quotequote all
I use the one's from TVRCC, very good.

Colin.

IPAddis

2,524 posts

313 months

Thursday 25th May 2006
quotequote all
I had two sets of Carbodiscs. The first were attached by the supplied velcro pads... for about 50 miles (and yes I cleaned the lights with meths first to ensure the glue stuck). The second set I attached by sections of double-sided foam tape. Worked much better but still looked ugly. I know the guy who designed Carbodiscs is a TVR fan (and may still be on here) but I'm afraid I just don't like them.

About 3 years ago, I found that Armourfend (those people that do the film to stop paint chips) sell special headlight protection film. Used on rally cars and available in a specific size for TVR Griffith spot lights. It is practically undetectable and the spotlights are still fine some 40,000 miles later.

I've also fitted it to our Mini and would do so on any car with similarly susceptible lights.

Ring them direct: www.armourfend.com/index.htm

Ian A.

Seasider

12,728 posts

278 months

Thursday 25th May 2006
quotequote all
The armourfend leaves 2 or 3mm of glass exposed

I also think if the stone or you were moving fast enough it might not help anyway...

richb

56,259 posts

313 months

Thursday 25th May 2006
quotequote all
Seasider said:
The armourfend leaves 2 or 3mm of glass exposed
I also think if the stone or you were moving fast enough it might not help anyway...
Maybe but they do offer some level of protection and as Ian says, the Carbo Disks do look a bit ugly.

llanelli-rob

533 posts

253 months

Thursday 25th May 2006
quotequote all
richb said:
Seasider said:
The armourfend leaves 2 or 3mm of glass exposed
I also think if the stone or you were moving fast enough it might not help anyway...
Maybe but they do offer some level of protection and as Ian says, the Carbo Disks do look a bit ugly.


I cannot see why anybody would say the carbo discs look ugly?

As I said in my previous post I've just fitted these and unless you are within five feet of the car they cannot be noticed!

torquemada

621 posts

302 months

Thursday 25th May 2006
quotequote all
llanelli-rob said:
unless you are within five feet of the car they cannot be noticed!


Steve's items are even more discrete - you would need good eyesight to spot them at five inches.

Ballistic Banana

14,706 posts

296 months

Thursday 25th May 2006
quotequote all
I have amourfend ones on, and One lens has cracked but this has held it alltogether

BB

FlipFlopGriff

7,144 posts

276 months

Thursday 25th May 2006
quotequote all
torquemada said:
I found a better option are the protectors sold by Steve Dunster (S.D.Tools Ltd). These are moulded to shape and held in place by the driving light rubber 'gaiters'. Fiddly to fit, but once in place you wouldn't know they were there. In my experience the 'carbo discs' are quite obtrusive and difficult to secure effectively.
I bought mine about 3 years ago (£25/pair), so not sure if still available. Try emailing Steve at steve@sdtools.freeserve.co.uk

Hope this helps.


I've got these too. Not quote 3 years ago but maybe 2. Fit under the rubber band but at the same price much better value than the discs IMHO.
Armourfend patches only cover the main bulb area but leave a 2mm gap around the edge - most likely place for a good chunk loss.
FFG

simpo two

92,709 posts

294 months

Thursday 25th May 2006
quotequote all
RichardD said:
Could try these... www.tvrcc-shop.co.uk/acatalog/TVRCC_Catalogue_Misc_Items_33.html

Amazing, it let me look at the page without a password.
I bought four for £10 from a local motor accessory shop. Designed for a Capri but that's OK by me

andy o

Original Poster:

41 posts

244 months

Friday 26th May 2006
quotequote all
Again thanks for all the responses on only my second posting.

I have pumped for the TVRCC shop type and will let you know how I get on.